1. DL manuals
  2. R.V.R. Electronica
  3. Transceiver
  4. PTRLNV/4
  5. User Manual

R.V.R. Electronica PTRLNV/4 User Manual

Manual is about: Radio transceiver and receiver

Summary of PTRLNV/4

  • Page 1

    Ptrlnv/4 & rxrlnv/4 user manual volume1 manufactured by r.V.R elettronica s.P.A. Italy.

  • Page 2

    Ptrlnv/4 & rxrlnv/4 - user manual version 1.0 © copyright 2010 r.V.R. Elettronica spa via del fonditore 2/2c - 40138 - bologna (italia) telephone: +39 051 6010506 fax: +39 051 6011104 email: info@rvr.It web: www.Rvr.It all rights reserved printed and bound in italy. No part of this manual may be rep...

  • Page 3: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica i user manual rev. 1.0 - 09/06/10 table of contents 1. Preliminary instructions 1 2. Warranty 1 3. First aid 2 3.1 treatment of electrical shocks 2 3.2 treatment of electrical burns 2 4. General description 3 4.1 unpacking 3 4.2 features 3 4.3 ptrlnv/4 frontal panel d...

  • Page 4: Ptrlnv/4 & Rxrlnv/4

    Ii user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica this page was intentionally left blank.

  • Page 5: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 1 / 34 user manual rev. 1.0 - 09/06/10 1. Preliminary instructions • general warnings this equipment should only be operated, installed and maintained by “trained” or “qualified” personnel who are familiar with risks involved in working on electric and electronic circ...

  • Page 6: Ptrlnv/4 & Rxrlnv/4

    2 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica units returned without a return authorisation may be rejected and sent back to the sender. 4 be sure to include a detailed report mentioning all problems you have found and copy of your original invoice (to show when the warranty...

  • Page 7: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 3 / 34 user manual rev. 1.0 - 09/06/10 4. General description the ptrlnv/4 and rxrlnv/4 are, respectively a broadband radio transmitter and receiver for the transport of audio signals as an auxiliary to the frequency modulation sound broadcasting. This type of equipme...

  • Page 8: Ptrlnv/4 & Rxrlnv/4

    4 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica the ptrlnv/4 is available with internal stereo coder which can guarantee an optimum stereophonic separation as well as a low level of harmonic distorsion. In function of your own requirements it can be configurated for the functi...

  • Page 9: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 5 / 34 user manual rev. 1.0 - 09/06/10 the user can navigate between the different submenus by using the knob. The status of the unit is indicated by four leds which are present on the front pannel: • on, lock, foldback, rf off for the ptrlnv/4 . • on, lock, pilot, mu...

  • Page 10: Ptrlnv/4 & Rxrlnv/4

    6 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica 4.3 ptrlnv/4 frontal panel description [1] air flow grid for the passage of the air flow of the forced ventilation. [2] rf off yellow led, lit when the transmitter’s power output is inhibited by an external interlock command. [3]...

  • Page 11: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica / 34 user manual rev. 1.0 - 09/06/10 4.4 ptrlnv/4 rear panel description [1] main fuse fuse for mains supply. [2] mains standard iec connector for mains supply 90 ÷ 260 v, +10/- 15%. [3] air flow grid for the passage of the air flow of the forced ventilation. [4] r.F....

  • Page 12: Ptrlnv/4 & Rxrlnv/4

    / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica 4.5 ptrlnv/4 connector description 4.5.1 service (to program of factory parameters) type: db9 female 1 nc 2 tx_d 3 rx_d 4 internally connected with 6 5 gnd 6 internally connected with 4 7 internally connected with 8 8 internally co...

  • Page 13: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica / 34 user manual rev. 1.0 - 09/06/10 4.5.3 left (mono) & right type: xlr female 1 gnd 2 positive 3 negative 2 1 3.

  • Page 14: Ptrlnv/4 & Rxrlnv/4

    10 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica 4.6 rxrlnv/4 frontal panel description [1] headphone jack plug for phone output. [2] mpx monitor mpx output monitor bnc connector [3] mute yellow led, lit on when the muting is activated, which means that the rf input signal has...

  • Page 15: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 11 / 34 user manual rev. 1.0 - 09/06/10 4. Rxrlnv/4 rear panel description [1] main fuse fuse for mains supply. [2] mains standard iec connector for mains supply 90 ÷ 260 v, +10/- 15%. [3] 24 vdc in red positive connectors for the external 24v supply. [4] air flow gri...

  • Page 16: Ptrlnv/4 & Rxrlnv/4

    12 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica 4. Rxrlnv/4 connector description 4.8.1 service (to program of factory parameters) type: db9 female 1 nc 2 tx_d 3 rx_d 4 internally connected with 6 5 gnd 6 internally connected with 4 7 internally connected with 8 8 internally ...

  • Page 17: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 13 / 34 user manual rev. 1.0 - 09/06/10 4.8.3 left (mono) & right type: xlr male 1 gnd 2 positive 3 negative 2 1 3.

  • Page 18: Ptrlnv/4 & Rxrlnv/4

    14 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica 4.9 technical description parameters ptrlnv/4 rxrlnv/4 rated output power 5 w (1.6 ghz) or 2/5 w (2.4 ghz) frequency range operational mode modulation type primary power ac power consumption 50va 25va phisical dimensions (w x h ...

  • Page 19: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 15 / 34 user manual rev. 1.0 - 09/06/10 5. Ptrlnv/4 quick guide for installation and use this chapter contains the necessary instructions for the installation and use of the equipment. In case some aspects are not totally clear, for instance when a user is using this ...

  • Page 20: Ptrlnv/4 & Rxrlnv/4

    16 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica connect the audio cable and rds/sca of the signal source to the proper input connectors of the ptrlnv/4 . 5.2 operation switch on the transmitter by putting the switch, located on the front panel, on the position “i” (on) . Ente...

  • Page 21: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 1 / 34 user manual rev. 1.0 - 09/06/10 after having modified the value of a parameter, the cursor goes on blinking for approximately 15 seconds, waiting for confirmation from the user. If the user doesn’t confirm the new value (i.E., the button is not pressed), the pa...

  • Page 22: Ptrlnv/4 & Rxrlnv/4

    1 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica w (empty arrow) - the arrow points out the current line, the parameter of which cannot be modified. This symbol is present in the menus made up of more than two lines to help scroll the menu. When turned on, the lcd display shows...

  • Page 23: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 1 / 34 user manual rev. 1.0 - 09/06/10 general setting audio setting levels meters measures values about version exit menu 3 if you instead want to go back to the predefined menu, is sufficient select the esc entry then push the encoder. To enter into one of the subme...

  • Page 24: Ptrlnv/4 & Rxrlnv/4

    20 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica !!Attention!! Over temperature status 1 once restored the normal operation conditions, the power supply will come rehabilitated with the same modalities antecedent the alarm. If the modulation ran out, under 20 khz, for a time o...

  • Page 25: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 21 / 34 user manual rev. 1.0 - 09/06/10 f1 :2350.000mhz pwr: on mod: x 1 pgd: 50 % pgr: 50 % iic: 1 exit menu 4 f1 regulation of set up frequency. After having set a new frequency value, press the encoder to confirm the choice. The transmitter will release from the cu...

  • Page 26: Ptrlnv/4 & Rxrlnv/4

    22 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica exit the entry allows to the user the prompt exit from current submenu and goes back to the “main menu”. 5.4.2 audio setting menu this menu lets to set the preemphasis, the mpx and l&r channel impedance, the audio and clipper mo...

  • Page 27: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 23 / 34 user manual rev. 1.0 - 09/06/10 5.4.4 measure values menu this screen, consisting of several lines that can be scrolled with the rotation of the encoder, shows to the user the measures relating to the final power amplifier of the equipment: fwd: 2.4 w rfl: 2.9...

  • Page 28: Ptrlnv/4 & Rxrlnv/4

    24 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica 6. Rxrlnv/4 quick guide for installation and use this chapter contains the necessary instructions for the installation and use of the equipment. In case some aspects are not totally clear, for instance when a user is using this ...

  • Page 29: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 25 / 34 user manual rev. 1.0 - 09/06/10 6.2 operation switch on the receiver by putting the switch, located on the front panel, on the position “i” (on) . Enter the “general setting menu” and set the working frequency desired. With the help of “audio setting menu”, se...

  • Page 30: Ptrlnv/4 & Rxrlnv/4

    26 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica 6.3 setting and calibration the only adjustments to have made manually on the rxrlnv/4 are those relating to the audio operation levels and modes. When you insert the receiver in a system, you will have to adjust the level depen...

  • Page 31: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 2 / 34 user manual rev. 1.0 - 09/06/10 the above line displays the instantaneous reading of the signal level received on analog scale. To change the set muting level, keep the encoder pressed for about 5 seconds until it enters the modification mode. The screen that i...

  • Page 32: Ptrlnv/4 & Rxrlnv/4

    2 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica main menu enter general setting menu audio setting menu levels meters menu enter enter enter selection menu about version menu power setting menu figure 6.1 6.4.1 general setting menu from this menu the user can change frequency,...

  • Page 33: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 2 / 34 user manual rev. 1.0 - 09/06/10 mod display modality of the modulation selectable between x1 and x10. The indication of the instantaneous deviation is multiplied by a factor 10 in the x10 mode, so the hatched indicator on the predefined menu will coincide with ...

  • Page 34: Ptrlnv/4 & Rxrlnv/4

    30 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica 6.4.3 levels meter menu the right, left and sca channel output levels are depicted with horizontal bars, as shown in the following figure. The hatched pointer indicates the level that corresponds with the total deviation at 100%...

  • Page 35: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 31 / 34 user manual rev. 1.0 - 09/06/10 7. Identification and access to the modules 7.1 identification of the modules the ptrlnv/4 & rxrlnv/4 is made up of various modules linked to each other through connectors so as to make maintenance and any required module replac...

  • Page 36: Ptrlnv/4 & Rxrlnv/4

    32 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica 7.1.2 ptrlnv/4 upper view (2.3÷2.4 ghz version) the figure below shows the equipment upper view with the various components pointed out. Figure 7.2 [1] /s-ptnv4 stereo coder card option ( slctc30v03 ) [2] mainboard ( sl040ma2002...

  • Page 37: Ptrlnv/4 & Rxrlnv/4

    Ptrlnv/4 & rxrlnv/4 elettronica 33 / 34 user manual rev. 1.0 - 09/06/10 7.1.3 rxrlnv/4 upper view (1.3÷1.7 & 2.3 ÷ 2.4 ghz version) the figure below shows the equipment upper view with the various components pointed out. Figure 7.2 [1] /05-rxrlnv4 stereo decoder card option ( sldecmdlcd01 ) [2] main...

  • Page 38: Ptrlnv/4 & Rxrlnv/4

    34 / 34 user manual rev. 1.0 - 09/06/10 ptrlnv/4 & rxrlnv/4 elettronica this page was intentionally left blank.

  • Page 39

    ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ _______________________________________________________________...

  • Page 40

    R.V.R elettronica s.P.A. Via del fonditore, 2 / 2c zona industriale roveri · 40138 bologna · italy phone: +39 051 6010506 · fax: +39 051 6011104 e-mail: info@rvr.It · web: http://www.Rvr.It the rvr logo, and others referenced rvr products and services are trademarks of rvr elettronica s.P.A. In ital...