R2hobbies.com Eurgle Instruction Manual - Lcd Function Explanation
Eurgle 2.4Ghz 3 Ch LCD Wheel
Digital Programmable Radio Gear
rcps2805004
Join our FREE Membership and accept 10%off Offer! R2hobbies.com
LCD Function Explanation
LCD Display
1. Turn the ENTER button counterclockwise: decrease the rate
2. Turn the ENTER button: increase the rate
3. Press ENTER button: select the menu
4. Press BACK button: return to the menu
5. Press END button: end the programming
OPENING SCREEN
1. Show current model number and user name, Press ENTER button, the screen will show voltage
and model number
2. “LOW POWER” will be blinking when the voltage is lower than 9.5V, simultaneously buzzer will
be warning.
Model
1. Function explanation
- The radio (FS-GT3B) can be stored with ten memories (FS0-FS9), and each memory in the
radio can be setup separately to match up with different models.
2. Parameter specification
- The initial model NO. is Model “NO.0”. ACB is for the name of model, the initial data is
“FS0”
3. Operation
- Switch on the transmitter and press the “ENTER” button to be ready for choice
- Turn to left or right to choose the model you want from the menu, then press “ENTER”
button and enter the next menu, meanwhile “8” will flash, at last turn left or right and
confirm the model. ( totally 10sets of memories. 0 to 9).
- Press “ENTER” button to finish the operation after edition.
- Return to menu option Press BACK button and return to the initial menu at any condition.