RAB Lighting GNLED13N Instruction Manual - page 2
2
3
CAT# GSST
GSAC Shade
Shade Mounting
screws(4)
Housing
Shade Mounting
Screws (4)
GSST Shade
Housing
1. The
Shade mounts to the Housing
with four Shade Mounting Screws
provided with the Shade.
2. Shade has keyhole slots for easy
installation.
Angled Cone Shade
CAT# GSAC
1. The
Shade mounts to the Housing
with four Shade Mounting Screws
provided with the Shade.
2. Shade has keyhole slots for easy
installation.
Angled Dome Shade
CAT# GSAD
1. Remove frosted lens & frame.
2. Install
Spot or Rectangular
Refl ector.
3. When installing the Rectangular
Refl ector be aware of the direction
Rectangular Light Pattern.
See illustration below.
4. We recommend using a clear lens for
these refl ector types. Replace frosted
lens and frame with clear lens & frame
provided with this kit.
5. Tighten
four
Housing Screws.
6. Add shade if desired.
Lens Refl ector Kit
CAT# LRFGNLED Clear Lens with Spot Refl ector and Rectangular Refl ector for
optional patterns.
1. The
Shade mounts to the Housing
with four Shade Mounting Screws
provided with the Shade.
2. Shade has keyhole slots for easy
installation.
Straight Downlight Shade
Shade Mounting
screws(4)
GSAD Shade
Housing
1-888-RAB-1000 www.rabweb.com
1-888-RAB-1000 www.rabweb.com
Housing Screws (4)
Rectangular Refl ector
Rectangular Light Pattern
Orient refl ector properly within fi xture
or rotate fi xture to set beam in
orientation desired.
Spot Refl ector