Rabbit 2000 Getting Started Manual - 1. I
Getting Started Manual
1
1. I
NTRODUCTION
The Rabbit 2000™ is a new and powerful microprocessor. Both
hardware and software design are easy with the Rabbit.
This Development Kit has the essentials that you need to design
your own a microprocessor-based system, and includes a com-
plete software development system (Dynamic C). This kit con-
tains a powerful single-board computer (the Jackrabbit board).
With this kit you will be able to write and test complex software.
You will be able to prototype circuits that interface to a Rabbit
2000 microprocessor.
1.1 Development Kit Contents
The Rabbit 2000 Development Kit contains the following items:
•
BL1810 single-board computer.
•
Prototyping Board.
•
AC adapter, 12 V DC, 500 mA. (Included only with Development Kits sold for the
North American market. A header plug leading to bare leads is provided to allow over-
seas users to connect their own power supply with a DC output of 7.5–25 V.)
NOTE:
The linear voltage regulator becomes rather hot for voltages above 15 V.
•
10-pin header to DE9 programming cable with integrated level-matching circuitry.
•
Dynamic C SE CD-ROM, with complete product documentation on disk.
•
This Getting Started manual.
•
A bag of accessory parts for use on the Prototyping Board.
•
Screwdriver.
•
Rabbit 2000 Processor Easy Reference poster.
•
Registration card.