Rabbit 2000 Getting Started - page 2
Rabbit 2000 Development Kit
Rabbit 2000 Development Kit Getting Started Manual
Part Number 019-0068 • 010118 - D • Printed in U.S.A.
Copyright
© 1999 Rabbit Semiconductor
•
All rights reserved.
Rabbit Semiconductor reserves the right to make changes and improvements to its prod-
ucts without providing notice.
Trademarks
•
Dynamic C
®
is a registered trademark of Z-World, Inc.
•
Windows
®
is a registered trademark of Microsoft Corporation
•
Jackrabbit™ is a trademark of Z-World, Inc.
•
Rabbit 2000™ is a trademark of Rabbit Semiconductor
Notice to Users
When a system failure may cause serious consequences, protecting life and property
against such consequences with a backup system or safety device is essential. The buyer
agrees that protection against consequences resulting from system failure is the buyer’s
responsibility.
This device is not approved for life-support or medical systems.
All Rabbit Semiconductor products are 100 percent functionally tested. Additional testing
may include visual quality control inspections or mechanical defects analyzer inspections.
Specifications are based on characterization of tested sample units rather than testing over
temperature and voltage of each unit. Rabbit Semiconductor may qualify components to
operate within a range of parameters that is different from the manufacturer’s recom-
mended range. This strategy is believed to be more economical and effective. Additional
testing or burn-in of an individual unit is available by special arrangement.
Company Address
Rabbit Semiconductor
2932 Spafford Street
Davis, California 95616-6800
USA
Telephone: (530) 757-8400
Facsimile: (530) 757-8402
Web site: http://www.rabbitsemiconductor.com