Rabbit Air BioGP SPA-421A User Manual - page 8
7
Auto Mode
The fan speed of the air cleaner will change automatically depending on the amount of impurities in the air as
detected by the dust and odor sensors.
Press the Auto Mode button on the remote control to start the Auto Mode operation.
Strat operation
Air Quality
Level Indicator
Fan Speed
Silent
Low
Med
High
Turbo
Mode of Operation
ATTENTION
When the air is heavily polluted at the time the power plug is inserted, the unit may not work properly in
auto mode because the baseline or reference point is too high. To reset the air quality baseline, unplug
the unit and re-insert it when the air quality is in normal condition.
The unit will operate at silent fan speed when the air quality level is normal or is below the baseline level.
Turbo Mode
The air purifier operates at turbo fan speed for 10 minutes and
then changes to Auto mode.
Press the Turbo Mode button on the remote control to start
the Turbo Mode operation.
First 10 Minute
After 10 Minute
Mode of
Operation
Silent Mode
The air purifier operates at silent fan speed continuously.
Press the Silent Mode button on the remote control to start
the Silent Mode operation.
Silent Mode
Turbo Mode
Mode of
Operation
Manual Mode
The air purifier operates at the selected fan speed continuously.
Press the Fan Level Button on the remote control to start the
Manual Mode operation.
Manual Mode
Mode of
Operation
Low
Medium
High
Turbo
1
2
3
4
Rabbit Air