Rabbit Air SPA-550A Owner's Manual - page 6
Device Settings - Section 2
When the unit has been idle for five minutes, the
user interface lights will disappear. To view the
display, tap the control button on the unit or
remote.
When the air purifier is in Auto Mode, the Air Quality
Indicator will continually monitor the odor and particle
levels in the air, the user interface will light up briefly each
time the pollution level changes. When the purifier is in a
manual speed setting, the interface will not light up.
• Air Quality Indicator
These lights indicate the current manual speed
setting. Low fan speed is indicated by a single light.
High fan speed is indicated by five lights. When in
Auto Mode, the fan speed will adjust according to
the air quality.
• Fan Speed
These lights indicate the level of sensitivity of the air
quality sensor when the unit is in Auto Mode.
The fan adjusts its speed according to the air quality.
• Auto Mode
Set the air purifier to turn off after a specific period
of time. One light indicates a four-hour timer, two
lights indicate an eight-hour timer, three lights
indicate a 12-hour timer.
• Timer
When this light is on, it means the unit is generating
negative ions.
• Negative Ions
These lights indicate the level of air pollution detected.
on/off
Low
Medium
High
These lights indicate the fan speed of the unit.
Low
Medium
High
These lights indicate the sensitivity of the air quality sensor.
Low
Medium
High
These lights indicate how long the timer has been set for.
4 hours
8 hours 12 hours
This light illuminates if the Negative Ion Generator is on.
This feature can be accessed
through the main control button.
This feature can be accessed
through the remote.
9
10