Rac RAC-HP101 Manual

Other manuals for RAC-HP101: Assembly Manual

Manual is about: 2 in 1, with Wet & Dry Vac

Page of 9

Download

Print this page

Bookmark us

RAC-HP101

RAC-HP101 - Issue 1 - R.W. 29-08-08

2 in 1 Pressure Washer with Wet & Dry Vac

Manufactured under license for:

HILKA PRO IMPORTS

This product bears the selective sorting symbol for waste electrical and electronic equipment

(WEEE).

This means that this product must be handled pursuant to European Directive 2002/96/EC

in order to be recycled or dismantled to minimize its impact on the environment.

For further information, please contact your local or regional authorities.

Electronic products not intended in the selective sorting process are potentially dangerous

for the environment and human health due to the presence of hazardous substances.

Waste electrical products should not be disposed of with household waste.

Please recycle where facilities exist.

Check with your local authority or retailer for recycling advice.

GUARANTEE

This product is guaranteed for domestic use for a period of 12 months against faulty manufacture or materials.

This guarantee does not affect the statutory rights of the consumer. In the event of any problem occurring

please contact our Helpline at the number above for advice. This product is not guaranteed for HIRE purposes.

WARNING

Do not spray at people/animals

Do not spray at electrical supplies/generators

1 2 3 4 5 6 7 Next › »

Summary of RAC-HP101

Page 1
Rac-hp101 rac-hp101 - issue 1 - r.W. 29-08-08 2 in 1 pressure washer with wet & dry vac manufactured under license for: hilka pro imports this product bears the selective sorting symbol for waste electrical and electronic equipment (weee). This means that this product must be handled pursuant to eur...
Page 2
-1- -2- section 1 - pressure washer components safety and warning information general safety rules warning: read the instructions fully before using the product for the first time. Failure to follow the instructions may result in fire, electric shock and or serious injury. We recommend the user wear...
Page 3
-3- -4- assembly operating instructions before carrying out any assembly or disassembly of the unit please ensure that the unit is not connected to the electrical supply. Assembling your machine 1. Connect the high pressure connection hose (11) to the high pressure outlet (5) as shown in fig.1. 2. C...
Page 4
-5- -6- pre-operation adjusting fan pattern the angle of spray coming out of the lance may be adjusted on some lances by rotating the nozzle. This will vary the spray pattern from approximately a 0° narrow high impact stream to a 60° wide fan spray. ( fig 7 ) a narrow stream has high impact force on...
Page 5
-7- -8- release button fig 13 water inlet filter the water inlet filter must be inspected regularly, so as to avoid blockage and restriction in the water supply to the pump (fig 12). The inlet filter is located in the quick fit connector (14). Fig 12 turbo nozzle a turbo nozzle, sometimes referred t...
Page 6
-9- -10- detergents the use of detergents can dramatically reduce cleaning time and assist in the removal of difficult stains. Some detergents have been customized for pressure washer use on specific cleaning tasks. These detergents are approximately as thick as water. The use of thicker detergents,...
Page 7
-11- -12- troubleshooting chart symptom possible cause (s) corrective action(s) pressure washer does not start 1. Unit is pressurized 2. Poor plug connection or faulty outlet socket 3. Extension cord too long or undersized 4. Main voltage supply too low 1. Squeeze trigger on gun 2. Check plug, socke...
Page 8
Component list 1. Air inlet 2. On/off switch 3. Handle 4. Air outlet 5. Locking catches 6. Debris drum 7. Hose 8. Crevice tool 9. Square nozzle 10. Round brush 11. Filter bag 12. Rubber band 1 2 3 4 5 6 7 8 9 10 11 12 technical specification rated voltage: 220-240v ac rated power: 800w rated frequen...
Page 9
Operation troubleshooting chart note: your new rac wet & dry vac can be powered from a mains socket or from the 'vac socket' on the rear of the pressure washer. If using the 'vac socket' please follow these instructions: 1. Before connecting the pressure washer to the mains supply ensure that the 'c...