Racal-guardall countess countess user instructions ⊕.
Incorrect access codes if three incorrect access codes are entered within five minutes a tamper fault will be generated. 1. Setting full system enter the allocated four digit user code, the exit/entry warning sounder will emit a soft continuous tone. Leave by the appointed exit route. The system wil...
4. Setting home set system enter the allocated four digit user code. Press the * key followed by the 6 key, the exit/entry warning sounder will emit a low continuous tone. The pre set home set zone indicators will pulse (omitted). If a fault is present when the user code is entered, the sounder will...
8. Chime control the chime is a tone associated with any programmable zone and can be used to alert the user to any intrusion into a selected area. The chime can be turned on and off while in day mode as follows;- to enable chime press the * key followed by the zone number, then the * key to revert ...
11. Security code programming the control unit has a four digit security code that is programmable only by first entering the original code, then a menu number as follows;- key in key key number code factory code * 91 new user code 12. Reading logs the countess includes a logging mode which allows a...
