1. DL manuals
  2. Rackmount
  3. Switch
  4. CV-1601
  5. User Manual

Rackmount CV-1601 User Manual - Cv-401 / Cv-801 / Cv-1601

Manual is about: PS/2 DB-15 Cat5

Summary of CV-1601

  • Page 2: Cv-401 / Cv-801 / Cv-1601

    Installation c e b y r v e i w c e b y r v e i w ■ install each bracket using screws pro- vided shown in figure 1. ■ fix the kvm into the rack * hardware for fi xing the mounting bracket to the rack is not provided figure 1. Installing the bracket to the kvm. Figure 2. Fixing the kvm into the rack. ...

  • Page 3: Cv-401 / Cv-801 / Cv-1601

    Cv-401 / cv-801 / cv-1601 ps/2 db-15 kvm package content (only for rackmount kvm) kvm switch x 1 pc screw m3.2 x 4.5mm x 4 pcs screw m4 x 10mm x 8 pcs bracket x 1 set user manual x 1 pc power cord x 1 pc 5 4 2 6 1 3 user manual 1 6 5 4 3 2.

  • Page 4: Cv-401 / Cv-801 / Cv-1601

    Cv-401 cv-801 local console cascade connection cv-1601 cv-401 / cv-801 / cv-1601 ps/2 db-15 kvm cd-6 kvm cable cd-6 kvm cable connection rackmount kvm connection kvm modules back.

  • Page 5: Cv-401 / Cv-801 / Cv-1601

    Cascade ■ with the cv-401 cascade up to 116 servers. With the cv-801 cascade up to 120 servers. With the cv-1601 cascade up to 128 servers. ■ cascading multiple kvm by ca-6 cable local console bank 1 ca-6 cascade cable cascade bank 2 bank 1 bank 8 bank 2 bank 8 cv-401 / cv-801 / cv-1601 ps/2 db-15 k...

  • Page 6

    Kvm membranes power on ■ turn off all servers and kvm switches ■ make sure all cables / connectors are properly connected ■ recommend power on sequence is monitor, kvm switch fi nally computer 4 ports (only for cv-401) 16 ports bank no. Online channel channel select button shift button online channe...

  • Page 7

    Password password for cv-401 / cv-801 / cv-1601 the password is enabled by default, the default password is “00000000” eight zeros (do not use “0” on number pad) ■ set your own user name & password 1. Call kvm osd menu by pressing the kvm hotkey scroll lock + scroll lock + space bar 2. Select “chang...

  • Page 8

    Kvm osd osd menu for cv-401 / cv-801 / cv-1601 osd operation next to the system name the pc is powered on next to the system name the pc is selected osd osd menu on screen time scan scan interval from one pc port to next pc when applying auto scan change password change to a new password console on/...

  • Page 9

    Kvm hotkey hotkey function scroll lock + scroll lock + space bar calling osd menu scroll lock + scroll lock + switch to previous port scroll lock + scroll lock + switch to next port scroll lock + scroll lock + pgup switch to previous bank scroll lock + scroll lock + bank no. + port no. Switch to spe...

  • Page 10

    Optional accessories 1. Ps/2 3-in-1 kvm cable 1.1 cd-6 6 feet 1.2 cd-10 10 feet 1.3 cd-15 15 feet 1.4 cd-33 33 feet 2. Usb 2-in-1 kvm cable 2.1 cb-6 6 feet 2.2 cb-10 10 feet 2.3 cb-15 15 feet 3. Ps/2 kvm cascade cable 3.1 ca-2 2 feet 3.2 ca-6 6 feet 3.3 ca-10 10 feet 3.4 ca-15 15 feet 4. Usb kvm cas...

  • Page 11

    Dc power 12v, 24v, 48v input v 8 4 v 4 2 v 2 1 l e d o m input rating tl o v - 8 4 tl o v - 4 2 tl o v - 2 1 : e g a tl o v t u p n i v 5 7 ~ 6 3 v 6 3 ~ 8 1 v 8 1 ~ 9 : e g n a r t u p n i input current a m 0 5 a m 0 5 a m 0 5 d a o l o n - a m 0 2 2 1 a m 0 5 4 2 a m 0 5 9 4 d a o l ll u f - outpu...

  • Page 12

    Cv-401 / cv-801 / cv-1601 ▀ kvm port number of ports: 4 or 8 or 16 connector: hddb 15-pin connectivity: cd-6 / 10 / 15 / 33 6' / 10' / 15' / 33' 3-in-1 ps/2 kvm cable ▀ console graphic connector: hddb15-pin vga resolution: up to 1920 x 1440 bandwidth 200mhz input device: ps/2 mini-din 6-pin mouse, p...

  • Page 13

    General 1. How do the kvm switches allow the user to switch ports? There are two ways to switch ports. One is the membrane buttons on the front and the other way is with hot-key commands. 2. What operating systems do the kvms support? The kvms support multi-platform support allows you to control win...

  • Page 14: Chapter 10

    10. The server vga resolution does not match the resolution of monitor ? The kvm supports ddc function which will dynamically detect and the ddc data. The problem may come from the power on sequence. - for kvm switch the recommended power on sequence is - monitor, kvm switch and then servers. - for ...

  • Page 15

    1. There is no led display on kvm membrane switch i. Make sure the power adapter plugged into the kvm switch, if the led’s still off, perform soft reset to kvm switch. Ii. Power cycle kvm switch. 2. I can power on the kvm, but i am not getting any picture at all, how can i solve this? Switching to a...