- DL manuals
- RAD
- Modem
- ASM-61
- Installation and operation manual
RAD ASM-61 Installation and operation manual
Summary of ASM-61
Page 1
Installation and operation manual asm-61 2-wire symmetric vdsl-based modem version 1.0
Page 3: Notice
Asm-61 2-wire symmetric vdsl-based modem version 1.0 installation and operation manual notice this manual contains information that is proprietary to rad data communications ltd. ("rad"). No part of this publication may be reproduced in any form whatsoever without prior written approval by rad data ...
Page 4: Limited Warranty
Limited warranty rad warrants to distributor that the hardware in the asm-61 to be delivered hereunder shall be free of defects in material and workmanship under normal use and service for a period of twelve (12) months following the date of shipment to distributor. If, during the warranty period, a...
Page 5: General Safety Instructions
General safety instructions the following instructions serve as a general guide for the safe installation and operation of telecommunications products. Additional instructions, if applicable, are included inside the manual. Safety symbols this symbol may appear on the equipment or in the text. It in...
Page 6: Handling Energized Products
Handling energized products general safety practices do not touch or tamper with the power supply when the power cord is connected. Line voltages may be present inside certain products even when the power switch (if installed) is in the off position or a fuse is blown. For dc-powered products, altho...
Page 7
Connection of data and telecommunications cables data and telecommunication interfaces are classified according to their safety status. The following table lists the status of several standard interfaces. If the status of a given port differs from the standard one, a notice will be given in the manu...
Page 8: Fcc-15 User Information
To reduce the risk of fire, use only no. 26 awg or larger telecommunication line cords. Pour réduire les risques s’incendie, utiliser seulement des conducteurs de télécommunications 26 awg ou de section supérieure. Some ports are suitable for connection to intra-building or non-exposed wiring or cab...
Page 9
Canadian emission requirements this class a digital apparatus meets all the requirements of the canadian interference-causing equipment regulation. Cet appareil numérique de la classe a respecte toutes les exigences du règlement sur le matériel brouilleur du canada. Warning per en 55022 (cispr-22) t...
Page 10: Declaration of Conformity
Declaration of conformity manufacturer's name: rad data communications ltd. Manufacturer's address: 24 raoul wallenberg st. Tel aviv 69719 israel declares that the product: product name: asm-61 conforms to the following standard(s) or other normative document(s): emc : en 55022: 1998 information tec...
Page 11: Contents
Asm-61 ver. 1.0 i contents chapter 1. Introduction 1.1 overview..................................................................................................................... 1-1 product options ......................................................................................................
Page 12
Table of contents installation and operation manual ii asm-61 ver. 1.0
Page 13: Chapter 1
Asm-61 ver. 1.0 overview 1-1 chapter 1 introduction 1.1 overview asm-61 is a dedicated carrier-class vdsl (very high-bitrate digital subscriber line) modem operating at symmetrical line rate of 10 mbps. Asm-61 serves for transporting 10/100baset ethernet traffic over 2-wire line using vdsl technolog...
Page 14
Chapter 1 introduction installation and operation manual 1-2 overview asm-61 ver. 1.0 table 1-1. Line attenuation cable type attenuation [db] pic 0.4 mm/26 awg -66.0 pic 0.5 mm/24 awg -53.0 pe 0.4 mm/26 awg -64.2 pe 0.5 mm/24 awg -50.0 pe 0.63 mm/22 awg -41.4 pe 0.9 mm/19 awg -29.1 fp 1.14 mm -49.7 ...
Page 15
Installation and operation manual chapter 1 introduction asm-61 ver. 1.0 functional description 1-3 1.2 physical description figure 1-2 shows a 3d view of the asm-61 standalone modem. Figure 1-2. 3d view of asm-61 the front panel includes three leds, which display the status of power, line synchroni...
Page 16
Chapter 1 introduction installation and operation manual 1-4 technical specifications asm-61 ver. 1.0 the modem consists of the following major modules: • ethernet block includes an external ethernet component configured as a single phy and connected in one end at lan interface by passive components...
Page 17
Installation and operation manual chapter 1 introduction asm-61 ver. 1.0 technical specifications 1-5 line attenuation see table 1-1 power spectral density -58 dbm/hz to -98 dbm/hz, as per etsi ts 101270- 1 requirements spectral placement downstream: 0.9 mhz to 3.5 mhz upstream: 4 mhz to 7.9 mhz con...
Page 18
Chapter 1 introduction installation and operation manual 1-6 technical specifications asm-61 ver. 1.0
Page 19: Chapter 2
Asm-61 ver. 1.0 package contents 2-1 chapter 2 installation this chapter describes installation and setup procedures for the standalone asm-61 modem. After installing the unit, refer to chapter 3 for the operating instructions. Internal settings, adjustment, maintenance, and repairs may be performed...
Page 20
Chapter 2 installation installation and operation manual 2-2 installation and setup asm-61 ver. 1.0 2.3 installation and setup asm-61 is delivered completely assembled. It is designed for tabletop, wall or 19-inch rack installation. The asm-61/co units are installed at the central site, asm-61/cpe u...
Page 21
Installation and operation manual chapter 2 installation asm-61 ver. 1.0 installation and setup 2-3 table 2-1. 10/100base-t connector pinout pin signal 1 rx + 2 rx - 3 tx + 4 – 5 – 6 tx - 7 – 8 – connecting the power before switching on this unit and connecting or disconnecting any other cable, the ...
Page 22
Chapter 2 installation installation and operation manual 2-4 installation and setup asm-61 ver. 1.0
Page 23: Chapter 3
Asm-61 ver. 1.0 front panel indicators 3-1 chapter 3 operation this chapter provides the description of the asm-61 front-panel indicators, and details the modem's operating procedures (turn-on, front-panel indications, performance monitoring and turn-off). Installation procedures given in chapter 2 ...
Page 24
Chapter 3 operation installation and operation manual 3-2 operating asm-61 asm-61 ver. 1.0 3.2 operating asm-61 turning on asm-61 asm-61 is turned on as soon as the power is connected to the unit. The pwr indicator lights up and remains lit as long as asm-61 receives power. Normal operation always o...
Page 25: Customer Response Form
24 raoul wallenberg st., tel aviv 69719, israel tel: +972-3-6458181, fax: +972-3-6483331, +972-3-6498250 e-mail: , web site: customer response form rad data communications would like your help in improving its product documentation. Please complete and return this form by mail or by fax or send us a...
Page 27: Error Report
Error report type of error(s) ❒ incompatibility with product or problem(s): ❒ difficulty in understanding text ❒ regulatory information (safety, compliance, warnings, etc.) ❒ difficulty in finding needed information ❒ missing information ❒ illogical flow of information ❒ style (spelling, grammar, re...
Page 30
Publication no. 182-200-01/06 www.Rad.Com international headquarters: 24 raoul wallenberg street, tel aviv 69719, israel, tel: 972-3-6458181 fax: 972-3-6498250, 972-3-6474436, email: market@rad.Com north america headquarters: 900 corporate drive, mahwah, n.J. 07430, tel: (201) 529-1100 toll free: 1-...