Asm-mn-214 chassis for short range modems instal lation and operati on manual the access company.
Asm-mn-214 chassis for short range modems installation and operation manual notice this manual contains information that is proprietary to rad data communications ltd. ("rad"). No part of this publication may be reproduced in any form whatsoever without prior written approval by rad data communicati...
Limited warranty rad warrants to distributor that the hardware in the asm-mn-214 to be delivered hereunder shall be free of defects in material and workmanship under normal use and service for a period of twelve (12) months following the date of shipment to distributor. If, during the warranty perio...
General safety instructions the following instructions serve as a general guide for the safe installation and operation of telecommunications products. Additional instructions, if applicable, are included inside the manual. Safety symbols this symbol may appear on the equipment or in the text. It in...
Handling energized products general safety practices do not touch or tamper with the power supply when the power cord is connected. Line voltages may be present inside certain products even when the power switch (if installed) is in the off position or a fuse is blown. For dc-powered products, altho...
Before connecting the dc supply wires, ensure that power is removed from the dc circuit. Locate the circuit breaker of the panel board that services the equipment and switch it to the off position. When connecting the dc supply wires, first connect the ground wire to the corresponding terminal, then...
There are restrictions on the diameter of wires in the telecom cables, between the equipment and the mating connectors. To reduce the risk of fire, use only no. 26 awg or larger telecommunication line cords. Pour réduire les risques s’incendie, utiliser seulement des conducteurs de télécommunication...
Fcc-15 user information this equipment has been tested and found to comply with the limits of the class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial envir...
Français mise au rebut du produit afin de faciliter la réutilisation, le recyclage ainsi que d'autres formes de récupération d'équipement mis au rebut dans le cadre de la protection de l'environnement, il est demandé au propriétaire de ce produit rad de ne pas mettre ce dernier au rebut en tant que ...
Français certains produits peuvent être équipés d'une diode laser. Dans de tels cas, une étiquette indiquant la classe laser ainsi que d'autres avertissements, le cas échéant, sera jointe près du transmetteur optique. Le symbole d'avertissement laser peut aussi être joint. Veuillez observer les préc...
Français connexion au courant du secteur assurez-vous que l'installation électrique est conforme à la réglementation locale. Branchez toujours la fiche de secteur à une prise murale équipée d'une borne protectrice de mise à la terre. La capacité maximale permissible en courant du circuit de distribu...
Declaration of conformity manufacturer's name: rad data communications ltd. Manufacturer's address: 24 raoul wallenberg st., tel aviv 69719, israel declares that the product: product name: asm-mn-214 conforms to the following standard(s) or other normative document(s): emc: en 55022 (1994) limits an...
Asm-mn-214 ver. 1.0 i contents 1. Introduction .................................................................................................................. 1 2. Physical description ...................................................................................................... 2 3. Powe...
Table of contents installation and operation manual ii asm-mn-214 ver. 1.0
Asm-mn-214 ver. 1.0 introduction 1 installation and operation 1. Introduction the asm-mn-214 is a rack-mount chassis for modems, csus/dsus and converters. The chassis accommodates up to 14 cards, and supports more than 20 different types of cards. Any combination of plug-in cards can be installed. C...
Quick start guide installation and operation manual 2 physical description asm-mn-214 ver. 1.0 2. Physical description asm-mn-214 is a 19-inch, 4u high, rack-mount chassis. A 3-d view of a typical unit is shown in figure 2 . Figure 2. Asm-mn-214 chassis.
Installation and operation manual quick start guide asm-mn-214 ver. 1.0 power supply 3 3. Power supply the asm-mn-214 chassis can accept both ac or dc power supplies (ps). Led indicators located on the asm-mn-214 front panel show activity when the power supply is connected to the mains plug (see fig...
Quick start guide installation and operation manual 4 line and dte connectors asm-mn-214 ver. 1.0 4. Line and dte connectors for each of the 14 cards, the rear panel (see figure 3 ) contains line and dte connectors. Line interface line interface of asm-mn-214 may terminate in the following connector...
Installation and operation manual quick start guide asm-mn-214 ver. 1.0 line and dte connectors 5 bnc coaxial option another version of asm-mn-214 is the asm-mn-214/bnc. The line interface of that option terminates in two bnc coaxial connectors. The rear panel of asm-mn-214/bnc is illustrated in fig...
Quick start guide installation and operation manual 6 technical specifications asm-mn-214 ver. 1.0 dte interface the 25-pin d-type female interface connector provides all interface signals for the digital interfaces. Units with an x.21 or v.35 interface require an external mechanical adapter. Two op...
Installation and operation manual quick start guide asm-mn-214 ver. 1.0 plug-in cards 7 6. Plug-in cards the plug-in card types can be any asm-mn-214 rad rack version modems, csus/dsus or converters (any combination of up to 14 cards). Table 1 lists the available plug-in cards. Maximum number of plu...
Quick start guide installation and operation manual 8 installing asm-mn-214 asm-mn-214 ver. 1.0 7. Installing asm-mn-214 grounding – this unit should always be grounded through the protective earth lead of the power cable. Before connecting ac power to this unit, the mains plug should be inserted on...
Installation and operation manual quick start guide asm-mn-214 ver. 1.0 installing asm-mn-214 9 fifth screw – to ground (optional). Modems operating over 2-wire lines use xmt terminals for the receive and transmit pairs. 4. If required, attach the appropriate cia (cia/x.21/1, cia/v.35/1, cia/eth) or...
Quick start guide installation and operation manual 10 installing asm-mn-214 asm-mn-214 ver. 1.0
24 raoul wallenberg street, tel aviv 69719, israel tel: +972-3-6458181, fax +972-3-6483331, +972-3-6498250 e-mail: erika_y@rad.Com , web site: http://www.Rad.Com customer response form rad data communications would like your help in improving its product documentation. Please complete and return thi...
Error report type of error(s) or problem(s): incompatibility with product difficulty in understanding text regulatory information (safety, compliance, warnings, etc.) difficulty in finding needed information missing information illogical flow of information style (spelling, grammar, references, etc....
Publication no. 609-200-03/08 international headquarters 24 raoul wallenberg street tel aviv 69719, israel tel. 972-3-6458181 fax 972-3-6498250, 6474436 e-mail market@rad.Com north america headquarters 900 corporate drive mahwah, nj 07430, usa tel. 201-5291100 toll free 1-800-4447234 fax 201-5295777...