- innovation driven performance user manual mv-rad electric series 65 - 8.000 nm user manual for: • mv-rad 6 • mv-rad 14 • mv-rad 21 • mv-rad 34 • mv-rad 45 • mv-rad 60 • mv-rad 80
Version 1.0 - june 2015 2 user manual mv-rad table of contents 1. Generalinstructions 3 2. Descriptionofthefunctions 3 3. Settingdirectionofrotation 3 4. Settingthetorque 4 4.1 setting the torque 4 4.2 torque check program (option) 4 4.3 user menu 5 5. Operationofthetorquewrench 5 5.1 rotating count...
Version 1.0 - june 2015 3 user manual mv-rad 1. Generalinstructions 2. Descriptionofthefunctions note: do not use this torque wrench before reading these instructions. If the torque wrench does not function properly, do not attempt to repair the torque wrench, but contact rad torque systems b.V. Imm...
Version 1.0 - june 2015 4 user manual mv-rad when the torque wrench is in operation, the reaction arm will move oppositely to the direction of rotation. It is essential that the reaction arm can react off a solid surface (adjacent to the joint to be tightened). Warning: to prevent injury, always mak...
Version 1.0 - june 2015 5 user manual mv-rad 4.3 user menu pressing the menu button for more than three seconds will display the user menu. In this menu, the menu options can be selected using the arrow keys and confirmed with the menu key. 1. Voorselectie (preset / vorwahl) this menu option allows ...
Version 1.0 - june 2015 6 user manual mv-rad figure 2 reaction point clockwise operation counter clockwise operation 6. Movementofthereactionarm warning: in use, this tool must be supported at all times in order to prevent unexpected release in the event of a fastener or component failure! 6.1 insta...
Version 1.0 - june 2015 7 user manual mv-rad 6.4 reaction point ensure the reaction arm reacts off the middle of the foot as seen in figure 5a. Do not react off the heel of the reaction foot as seen in figure 5b. Please contact rad torque systems b.V. Or your local rad authorised distributor for cus...
Version 1.0 - june 2015 8 user manual mv-rad 8. Errors in the case of a malfunction or a message for the user, different messages can be shown on the display. These messages can be confirmed by pressing the “m” key. If certain errors appear on a regular basis, please contact rad torque systems, tel....
Version 1.0 - june 2015 9 user manual mv-rad 9.2 repaired tool warranty after the warranty has expired, a three (3) month warranty applies to the original purchaser against defective in material or workmanship or both from the date of repair. To qualify for the above mentioned warranties, written no...
Version 1.0 - june 2015 10 user manual mv-rad steel construction oil & gas windpower aerospace petrochemical commercial vehicles offshore official rad distributor for the benelux: rad torque systems b.V. Zuidergracht 19 3763 ls soest the netherlands phone: +31 (0)35 - 5882450 e-mail: info @radtorque...
