Radenso Pro M-Edition User Manual - page 3
1. Slide the windshield mounting bracket into the QuickMount slot at the front of the radar detector.
2. Plug the small end of the power cable into the power jack on the Radenso Pro-M on the left side and
connect the large plug with the 12V power socket in your car.
3. Press the red button at the large end of the power cable (at the 12V socket) to turn the power cable
on. The button will light up and indicate if Power is on.
4. Press the Power button (left button on top of unit) for 2 seconds to turn on Radenso PRO M. Unit will
power up with the start-up sequence. After a few seconds, the Radenso Pro-M will notify you with a
voice message that the satellite is connected.
5. Adjust the volume level by pressing the volume buttons “+2 or ”-” located on the right side of the
unit.
Radenso Pro-M is now ready to go. If you want to change any of the default settings of your unit please
refer to the next pages.
To start using your Radenso Pro-M radar detector follow these easy steps:
The Radenso Pro-M is one of the most powerful radar detectors in the industry. It’s designed to protect
the driver from speeding tickets/fines. The Radenso Pro-M communicates with the driver in English and
it’s main functions are the detection of microwave radars (X / K / Ka narrow bands), laser guns, red light
cameras and fixed- speed cameras (GPS database).
When a radar signal is detected, the driver will be alerted by a visual text warning and a voice/tone
alert. The display and voice alert will indicate the detected radar band, frequency and signal strength. A
beeping warning tone will increase its intensity with increasing signal strenght. The signal strenght has
ten levels. GPS alerts are reported by voice; for example “Speed Camera”.
Notifications: