1. DL manuals
  2. Radenso
  3. Radar Detector
  4. XP
  5. User Manual

Radenso XP User Manual

Manual is about: High Performance Long Range Radar Detector

Summary of XP

  • Page 1

    Xp xp xp xp high performance long range radar detector high performance long range radar detector high performance long range radar detector high performance long range radar detector user user user user manual manual manual manual © 2016 radenso®.

  • Page 2: Radar Detector Radenso Xp

    Page 1 radar detector radenso xp foreword congratulations on your new investment. The radenso xp was designed to deliver class leading radar detection performance on all radar bands coupled with the best false alert filtering in the industry. The built-in gps feature lets you lockout known false ale...

  • Page 3: Quick Start Up Guide

    Quick start up guide to start using your radenso xp radar detector follow these easy steps: 1. Slide the windshield mounting bracket into the quickmount slot at the front of the radar detector. 2. Plug the rj11 plug of the power cord power jack on the radenso xp on the left side and connect the larg...

  • Page 4: Button Operation

    ============================================================================= function of control buttons ============================================================================= ============================================================================= button operation =====================...

  • Page 5: Menu Mode

    ============================================================================= menu mode ============================================================================= 1. Press and hold power button for 2 seconds to enter menu mode. 2. Menu list (beginner mode ) menu list menu setting brightness mode ...

  • Page 6

    Ka5 mode ( 34.592 - 34.808 ghz) on off ka6 mode ( 34.806 - 35.166 ghz) on off ka7 mode ( 35.143 - 35.383 ghz) on off ka8 mode ( 35.378 - 35.618 ghz) on off ka9 mode ( 35.595 - 35.835 ghz) on off ka10 mode ( 35.830 - 35.998 ghz) on off laser mode on off pop mode on off bsm filter mode on off tsr filt...

  • Page 7: Factory Reset

    4. Menu control buttons 4.1. [mark] button: toggle downward 4.2. [city] button: toggle upward 4.3. [power] button : change menu setting or execute menu function forward 4.4. [mute] button : change menu setting or execute menu function backward 5. Exit menu 5.1. Select “exit” in manu 5.2. Press and h...

  • Page 8: Alarm Priorities

    ============================================================================= alarm priorities ============================================================================= 1. Poi detect alarm and poi pass alarm 2. Laser 3. Ka band 4. K band 5. X band 6. Poi limit speed alarm =======================...

  • Page 9: Gps Lockout

    4. Poi direction type 4.1. Db point : all-direction, two-direction, single-direction 4.2. User point : single-direction 5. Poi alert operates only when gps is connected. ============================================================================= gps lockout ========================================...

  • Page 10: Low Speed Mute

    2.1. All radar alerts on x and k bands are completely muted and only displayed if vehicle’s speed is lower than left speed setting (low speed mute). It does not mute ka and laser alerts. 2.2. Radar detector operates in city mode with reduced radar sensitivity set in city mode filter if vehicle’s spe...

  • Page 11: Mute Mode

    ============================================================================= mute mode ============================================================================= pressing the mute button during an alert will temporarily mute the detected signal and will automatically unmute 20 seconds after the ...

  • Page 12: Threat Display

    ============================================================================= threat display ============================================================================= if the detector detects more than one signal, the additional received signals will also be displayed. The display will show the t...

  • Page 13: Troubleshooting

    Page 13 troubleshooting problem root cause / corrective action the detector will not turn on - check if power cable is connected - turn on ignition - check the fuse located at the tip of the plug display is not turning on - power cable is disconnected or switch has not been turned on - display is se...

  • Page 14: Technical Specification

    Page 10 technical specification detector type dual conversion super-heterodyne receiver linear polarized self-contained antenna scanning frequency discriminator operating frequency: ka wide: 33.4 ghz - 36.0 ghz k wide: 24.100 ghz ± 150 mhz k narrow: 24.100 ghz ± 70 mhz x band: 10.525 ghz (± 50 mhz) ...

  • Page 15

    Page 11 one (1) year limited warranty radenso warrants, for one year, to the original retail owner, this radenso product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. Warranty duration: this warranty to the original user is valid for 12...