Radial Engineering BASSBONE OD User Manual - page 9
Radial Engineering Ltd.
Bassbone OD™
True to the Music
®
8
TYPICAL SETUPS
Using one bass: Plugging your bass into INPUT-A lets you use the A/B
select footswitch to toggle between channel-A and channel-B as if playing
through a two channel amp. This is because INPUT-B is equipped with
a special switching jack that, when unused, routes the signal from the
INPUT-A jack to channel-B.
A/B
SELECT
¼”
INPUT-A
INPUT-B
Using Two basses: Connecting a second instrument to the INPUT-B jack
breaks this special routing and turns the Bassbone OD into a two channel
preamp for two basses. Depressing the A/B select footswitch now toggles
between your two instruments. The channel status is displayed by two
LED indicators.
A/B
SELECT
¼”
¼”
INPUT-A
INPUT-B
¼
¼
Mixing two pickups: You can also have both channels on at the same
time by depressing the recessed BLEND switch. When the BLEND is set
to it’s inward position, the two channels on the Bassbone OD act like a
simple 2-in, 1-out mixer and the A/B select footswitch will be disabled.
This lets you connect a bass that has both a magnetic and a piezo pickup
using an ‘insert’ style stereo ¼” TRS cable.
A/B
BLEND
INPUT-A
INPUT-B
¼” TRS
¼ TRS
¼”
¼”
¼
¼
You can also connect to each channel individually with standard ¼”
cables should this better suit your instrument.
A/B
BLEND
INPUT-A
INPUT-B
PIEZO
MAGNETIC
PICKUP
¼”
¼”