Radial Engineering HEADLIGHT Manual - page 12
Radial Engineering Ltd.
Headlight™ User Guide
10
SETUPS
Headlight with 4 amps on stage
This is the guitar aficionado’s ultimate
setup. Output-1 is connected to a Fend-
er
®
Twin™ for a clean tone, output-2 to
an AC30™ for a stereo effect, output-3
to a Marshall
®
for crunchy rhythm and
output-4 is connected to a small 20-watt
amp for soloing at volume 10. Connect
a tuner to the dedicated output and use
the mute footswitch to turn the amps off
when needed.
Headlight as an ABY
Connect two amps from the Headlight
using outputs 1 and 2. Set the mute
function switch to the downward posi-
tion so that when the mute footswitch is
depressed, both amps will play at once.
You can then add effects pedals before
or after the Headlight to create various
setups. Select between the two amps
using the select footswitch or have both
amps play at once using the mute foot-
switch.
9VDC
Made in Canada
INPUT
TUNER
OUT
-2
OUT
-1
OUT
-4
OUT
-3
MUTE
TM
HEADLIGHT
LIFT
GND POL
180º
OUT 4
OUT 3
OUT 2
OUT 1
DRAG
MUTE
ALL ON
OUT 3-4
OUT 1-2
IN / TUNER
LIFT
GND POL
180º
LIFT
GND POL
180º
SELECT
MUTE
MIN
MAX
9VDC
9VDC
Made in Canada
INPUT
TUNER
OUT
-2
OUT
-1
OUT
-4
OUT
-3
MUTE
TM
HEADLIGHT
LIFT
GND POL
180º
OUT 4
OUT 3
OUT 2
OUT 1
DRAG
MUTE
ALL ON
OUT 3-4
OUT 1-2
IN / TUNER
LIFT
GND POL
180º
LIFT
GND POL
180º
SELECT
MUTE
MIN
MAX
9VDC