Radial Engineering J33 User Manual - page 5
4
True to the Music
Radial Engineering
J33 User Guide
INPUT PANEL FEATURES
1. LED power indicator
For left and right channels. Illuminates when the 15VDC
power supply is connected or when 48V phantom power is
applied from a mixing console.
2. Rumble filter
Applies a high pass filter (bass roll-off) when pushed in.
3. Gound lug
Attatches to the turntable ground wire.
4. 3.5mm stereo output jacks
-10dB (consumer level) stereo output for direct connection to
computer sound cards, laptops or any device with a 3.5mm
input. This connector is also known as 1/8" TRS
5. 1/4" stereo output jack
-10dB (consumer level) stereo output for direct connection to
a local mixer, recorder or any device with a 1/4" TRS input.
6. RCA stereo output jacks
-10dB (consumer level) stereo outputs for direct connection
to a hi-fi receiver AUX or CD input or any device with an
RCA input.
7. RCA phono (turntable) input jacks
RIAA equalized stereo input for turntable signals. Use in con-
junction with the gound lug.
6
7
5
1
4
3
2