Radial Engineering JX 42 User Manual - page 11
True to the Music
®
Radial Engineering Ltd.
JX-42™ Guitar and Amp Switcher
8
sWITCHInG GuITars
You can also select guitars using the optional JR-5 remote footswitch
(part no. R800 6600) by connecting it to the JX-42 using a standard XLR
cable. This lets you remotely select the inputs, allowing a stage tech to
select the active channel back stage while the JX-42 can be stationed
near the on stage amps. This has LED indicators that are powered by
the JX-42 to give you instant status notification. Note that the middle
mute footswitch on the JR-5 is not active when used with the JX-42. This
is because the mute is controlled using the optional JR-2 amp selector
footswitch discussed on page 7.
As an added bonus, there is a dedicated TUNER out on the rear panel.
This separately buffered output is always on to allow quick on-the fly
adjustments. You can use the JR-2 footswitch to mute the signal for quiet
on-stage tuning. When selected, the LED will illuminate and it will mute
both the A and B amp outputs.
JR-2 Selects Amp
JR-5 Selects Instrument Input