Radial engineering ltd. 1588 kebet way, port coquitlam bc v3c 5m5 tel: 604-942-1001 • fax: 604-942-1010 • email: info@radialeng.Com user guide mix 2:1 tm.
Page left blank.
Mix 2:1 two channel audio combiner & mixer overview.......................................................................................... 1 features .......................................................................................... 2 making connections ......................................
Radial engineering ltd. Mix 2:1™ user guide 1 overview the mix 2:1 is a simple summing mixer that makes merging two audio signals easy. Whether you need to sum mic or line level signals, or the outputs of two separate devices, the mix 2:1 allows you to do so without noise or coloration of the sound....
Radial engineering ltd. Mix 2:1™ user guide 2 features 1 5 7 8 6 2 3 4 1. On: individually activates each input. 2. Input level: sets the amount of attenuation applied to each input. 3. 180°: used to reverse the polarity on input-2 to correct cancellation when summing out-of-phase signals. 4. Level ...
Radial engineering ltd. Mix 2:1™ user guide 3 making connections before making connections, ensure that your sound system is turned off and all volume controls are turned down. This prevents any plug-in transients from damaging speakers or other sensitive components. The mix 2:1 is passive, and does...
Radial engineering ltd. Mix 2:1™ user guide 4 summing a stereo source to mono with the mix 2:1, you can quickly take a stereo feed from a mixing console or a recording interface and sum it to mono to feed a single speaker input on a pa system. Start by pushing in the on buttons for both inputs so th...
Radial engineering ltd. Mix 2:1™ user guide 5 summing two separate sources the mix 2:1 is also handy for summing audio signals from two different devices, such as a guitar mic and a passive di, or top and bottom snare drum mics. When summing two separate sources, start with the input level controls ...
Radial engineering ltd. Mix 2:1™ user guide 6 using the 180° switch the mix 2:1 includes a 180° switch which reverses the polarity of the audio on input-2 - this is sometimes referred to as a ‘phase reverse’. When two audio signals have similar content but are reversed in polarity, certain frequenci...
Radial engineering ltd. Mix 2:1™ user guide 7 block diagram* * subject to change without notice. A on/off input a output gnd lift input b gnd lift b on/off a level b level level defeat level defeat polarity passive mix female xlr and 1/4" jack female xlr and 1/4" jack g nd g nd.
Radial engineering ltd. Mix 2:1™ user guide 8 specifications* * subject to change without notice. Audio circuit type: ......................................................................................................................................... Passive mixer frequency response: .............
Radial engineering ltd. 1588 kebet way, port coquitlam bc v3c 5m5 tel: 604-942-1001 • fax: 604-942-1010 • email: info@radialeng.Com radial engineering ltd. (“radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according t...
