Radial engineering ltd. 1588 kebet way, port coquitlam bc v3c 5m5 tel: 604-942-1001 • fax: 604-942-1010 • email: info@radialeng.Com mixer and effects loop user guide.
Radial engineering ltd. Mix-blender™ user guide 1 mix-blender ™ mixer and effects loop user guide introduction ...................................................................................... 1 features .......................................................................................... ...
Radial engineering ltd. Mix-blender™ user guide 2 features 1. 9vdc power: connection for 9 volt power adapter (not included). Includes a cable clamp to prevent accidental power disconnection. 2. Return: ¼” jack brings the effects pedal chain back into the mix-blender. 3. Send: ¼” jack is used to fee...
Input-1 output effects in / out input-2 send return buffer buffer summer mix blend level-1 level-2 polarity buffer 180º 0º radial engineering ltd. Mix-blender™ user guide 3 overview the mix-blender™ is in fact two pedals in one. On one hand it is a mini 2 x 1 mixer, on the other, it is an effects lo...
Radial engineering ltd. Mix-blender™ user guide 4 making connections as with all audio equipment, always turn your amp off or volume down before making connections. This will prevent harmful signal spikes from connection or power-on transients from damaging more sensitive components. There is no pow...
Effects loop b effects loop a direct box mixer pa twin-city ab/y radial engineering ltd. Mix-blender™ user guide 5 two pickups you can also use the mix section to combine two pickups from the same guitar or bass. For instance, on acoustic, you may have both a magnetic and a piezo with preamp. You ca...
Texas overdrive texas overdrive radial engineering ltd. Mix-blender™ user guide 6 using the effects loop in the studio, it is common to add in a touch of reverb or delay to a vocal track. This is done using the effects loop that is built into the mixing console or digitally using a workstation. This...
Tuner pedal tuner always on mute while tuning tuner pedal radial engineering ltd. Mix-blender™ user guide 7 using a tuner the mix-blender’s send jack is always on while the return jack is actually a switching jack that is used to complete the effects loop circuit. This means that if nothing is conne...
Acoustic active only when effects is selected radial engineering ltd. Mix-blender™ user guide 8 adding a third guitar you can also use the effects loop to add a third guitar by connecting it to the return input jack. This would use the blend control to set the level as compared to the other two regu...
Phase cancellation no phase cancellation radial engineering ltd. Mix-blender™ user guide 9 using the polarity reverse switch some pedals will reverse the relative phase of the signal. This is normal as pedals are usually in series with each other and changing the phase has no audible effect. When ac...
Radial engineering ltd. Mix-blender™ user guide 10 audio circuit type: ..................................................... Discrete class-a main audio path - audio grade ic send-return loop frequency response: ...........................................................................................
Radial engineering ltd. 1588 kebet way, port coquitlam bc v3c 5m5 tel: 604-942-1001 • fax: 604-942-1010 • email: info@radialeng.Com radial engineering ltd. (“radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according t...
