Radial engineering 1638 kebet way, port coquitlam bc v3c 5w9 tel: 604-942-1001 • fax: 604-942-1010 email: info@radialeng.Com • web: www.Radialeng.Com radial engineering is a division of c•tec (jp cabletek electronics ltd.) w w w .Ra di al en g. Co m pro di direct box pro d2 stereo direct box user gu...
Welcome congratulations on your purchase of the radial pro di or pro d2 direct box, one of the most versatile and useful pieces of equipment you will likely ever own! Why do we say this? Simple: a good passive direct box can often find its way into all kinds of applications and be a real problem-solv...
Introduction the radial pro di is a passive direct box. This means that unlike active direct boxes that either require a battery or power of some sort to make them work, your pro di does not need any power at all. It is ‘plug & play’ easy-to-use. A direct box is primarily used to convert a high impe...
Feature set the radial pro di is a very simple yet effective device. It features a ¼” input connector that connects to the source or instrument, a ¼” thru-put connector that connects the instrument to the amplifier and finally, a low impedance balanced xlr output connector that provides a direct and t...
True to the music radial engineering pro di user guide 3 making connections using the radial pro di is easy. Before connecting, start by making sure all volume levels are set to zero and the audio system is turned off. This will avoid any loud pops in your sound system that could cause system damage...
True to the music radial engineering pro di user guide 4 re-amping with you radial pro di the term re-amping comes from taking a pre-recorded guitar track and sending it back through a guitar amplifier to re- amplify it, and then re-record it again. This trick has been used since the 1950s with artis...
True to the music radial engineering pro di user guide 5 can have more ‘reach’ and enhance the sound of some instruments. Passive dis tend to sound more ‘down to earth’ and less colored than active dis. The real advantage of passive dis over active ones is that they eliminate hum & buzz caused by gr...
Radial engineering 1638 kebet way, port coquitlam bc v3c 5w9 tel: 604-942-1001 • fax: 604-942-1010 email: info@radialeng.Com • web: www.Radialeng.Com radial engineering is a division of c•tec (jp cabletek electronics ltd.) w w w .Ra di al en g. Co m pro di direct box pro d2 stereo direct box user gu...
