Prod8 rackmount di www.Radialeng.Com owner’s manual true to the music radial engineering ltd. 1638 kebet way, port coquitlam bc v3c 5w9 tel: 604-942-1001 • fax: 604-942-1010 email: info@radialeng.Com web: www.Radialeng.Com radial prod8 owner's manual v1.0 - part #: r870 1190 00 subject to change wit...
Table of contents page introduction .................................................................... Inside cover prod8 overview ............................................................................... 1 feature functions ......................................................................
Radial engineering ltd. Prod8 owner’s manual true to the music 1 overview the radial prod8 is an 8 channel passive direct box and does not require any powering whatsoever to make it work. The high performance radial transformers are extremely efficient and will both balance the signal and convert the...
Radial engineering ltd. Prod8 owner’s manual true to the music ¼" phone panel reversable rack ears allow you to setup the prod8 with either the ¼" jacks or xlr connectors facing front. In-a/b dual inputs on each channel auto-merge to mono. Thru parallel thru-put connects to on-stage amp or mixer for...
Radial engineering ltd. Prod8 owner’s manual true to the music rackmount options reversible rack rails allow you to decide which connector panel faces the front of your rack. Depending on your system setup, you may want to have the xlrs facing ‘out’ of your rack and the ¼” inputs and thru-puts on th...
Radial engineering ltd. Prod8 owner’s manual true to the music using the radial prod8 for live touring, the most common approach to using a direct box is to connect the instrument to the a/b in- puts, your personal monitoring amp system from the thru and the balanced xlr output to the pa system. The...
Radial engineering ltd. Prod8 owner’s manual true to the music adding effects the loop jack on each channel works like an "insert" connection on a mixing console. The loop jack is a trs type that can send the signal out to a processor and return it to the prod8 signal path. Connect the input and out...
Radial engineering ltd. Prod8 owner’s manual true to the music flexible for large keyboard setups it is important to note that channels may be confi gured in dif ferent ways. For in- stance, in the example below channels 1 and 2 are used for a stereo master key- board and a pre-patched backup that is...
Radial engineering ltd. Prod8 owner’s manual true to the music midi redundant modular keyboards major concert tours cost millions to setup. Today , keyboard players often travel with back-ups to minimize downtime should a module fail. The merged inputs allow a second set of modules or keyboards to b...
Radial engineering ltd. Prod8 owner’s manual true to the music house mixing console redundant back-up tracks the use of backing tracks has become common in today’s concerts as fans expect to hear the full orches- tration and backing vocals of their favorite songs. The prod8 provides an effective mea...
Radial engineering ltd. Prod8 owner’s manual true to the music faq can i use the prod8 with guitars or basses? Yes of course you can, but keep in mind that the resistive mixer may apply a bit of a load on the instrument. This will not be noticeable with active (battery equipped) instruments like aco...
Radial engineering 3 year transferable warranty radial engineering ltd. (“radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair or replace (at its option) any defe...
