Radial Engineering Voco-Loco User Manual

Manual is about: Mic Preamp and Effects Loop

Summary of Voco-Loco

  • Page 1

    True to the music www.Radialeng.Com true to the music ® ® user guide radial engineering ltd. 1588 kebet way, port coquitlam british columbia, canada, v3c 5m5 tel: 604-942-1001 • fax: 604-942-1010 email: info@radialeng.Com voco-loco mic preamp and effects loop ™.

  • Page 2: Table of Contents

    Radial voco-loco mic preamp and effects loop ™ ® table of contents page overview ..........................................................................1 features ...........................................................................2 making connections .........................................

  • Page 3

    Radial engineering ltd. Voco-loco™ preamp loop true to the music ® 1 overview the voco-loco is a mic-to-effects interface that enables the vocalist, sax, trumpet or harmonica player to use pedals just like an electric guitarist. In other words, you connect your microphone to the voco-loco and it con...

  • Page 4

    Radial engineering ltd. Voco-loco™ preamp loop true to the music ® feature set 1. Mic input: balanced xlr input for your microphone. 2. 48v: recessed switch turns on 48v phantom power for condenser mics. When turned on, the 48v led indicator illuminates. 3. Send/recv: unbalanced ¼” jacks used to sen...

  • Page 5

    Radial engineering ltd. Voco-loco™ preamp loop true to the music ® 3 making connections as always, ensure volume levels are turned off before making connections. This avoids turn on and connection transients that can cause a loud pop in the pa system which could damage more sensitive components such...

  • Page 6

    Radial engineering ltd. Voco-loco™ preamp loop true to the music ® setting up the dry sound start with both footswitches turned off. Check the led indicators and make sure they are also off. Set all the voco-loco controls to the 12 o’clock position to start. Wet dry preamp & equalizer effects loop 4...

  • Page 7

    Radial engineering ltd. Voco-loco™ preamp loop true to the music ® 5 using the polarity reverse if you notice that the signal becomes weak when you blend the wet with the dry signals using the mix control, one of your pedals is likely reversing the polarity which in turn is causing phase cancellatio...

  • Page 8

    Radial engineering ltd. Voco-loco™ preamp loop true to the music ® using the left-hand footswitch the left footswitch can be assigned as either a ‘mute’ switch or as an ‘all-wet’ effect loop. The function is selected using the recessed mute/loop switch on the left side. Use a small screw driver to c...

  • Page 9

    Radial engineering ltd. Voco-loco™ preamp loop true to the music ® 7 using the voco-loco with various effects adding distortion to a vocal or instrument adding distortion can be a lot of fun! Although you may automatically think of bands like nine inch nails, you do not necessarily need to use full-...

  • Page 10

    Radial engineering ltd. Voco-loco™ preamp loop true to the music ® 8 voco-loco with delay & reverb the most common use for the voco-loco is adding traditional effects such as echo and reverb to the mic. Doubling up a vocal with a slight delay can add depth, modulation and perceived loudness when per...

  • Page 11

    Radial engineering ltd. Voco-loco™ preamp loop true to the music ® 9 audio circuit type: .................................... Integrated op-amp with class-a fet input frequency response: .............................................................................20hz ~ 20khz total harmonic distorti...

  • Page 12

    ® www.Radialeng.Com three year transferable limited warranty radial engineering ltd. (“radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair or replace (at its opt...