Radiance 7201111 Instruction Manual - page 25
Manual is about: FOLLOW SPOTLIGHT
of
26
RAD/23
REPLACEMENT OF FOCUS CABLE ASSEMBLY
1. Dismount the knob and pulley assembly (A) from 7201106 Zoom/Focus Assembly (see Figure 7).
Loop the wire rope (B) around the pulley as shown, and replace the knob and pulley.
2. Routethewireropeasshown.Connectloopsusingtheexpansionspring(C)andpullwirerope
over front pulley.
The Focus Cable Assembly 7201181 consists of the wire rope (B) cut to length and terminated with
loops,andtheexpansionspring(C).
Focus Cam
Rear Pulley
Front Pulley
5158018 Spring
Zoom Control Pulley
Loop
Wire Rope