Radio Ocean RO4700 User manual - page 18
6.6.2.5 COURSE/SPEED DISPLAY OPTIONS (COG/SOG)
You can enable COG (Course over Ground) and SOG (Speed over Ground)
displayed on normal mode.
If the TIME display is turn ON, COG/SOG will be turned off automatically,
since it share the same bottom line for display.
6.7
RADIO SETUP
Under Radio Setup submenu, there are 4 items that user can alter
settings.
6.7.1.1 CHANNEL NAME display
To set the channel name to ON or blank on the first line. Maximum of
12 characters could be set for channel name. channel name also allows
to edit. The way is the same as Buddy List edit procedures.
1
Select RADIO SETUP then CH NAME, then DISPLAY
2
Select ON (on) or OFF (off) as desired, this is example, select on and
press the CH knob the screen shows the channel name.
6.7.1.2 CHANNEL NAME EDITING
1
Select RADIO SETUP then CH NAME, then CH INFO, press the CH
knob the screen shows the channel name and EDIT and DELETE.
2
Select EDIT and press the CH knob to edit the existing name, Input the
new name over the existing name and press the CH knob to display the
YES/NO confirmation
3 Press
the
CH knob to confirm the new channel name, then press cancel
to return t o the menu.
CALLING
DISPLAY NAME
>CH INFO
EDIT CH NAME
>YES
OFF
DISTRESS
27º34.1268 N
102º55.5587 W
356º 12.6Ks
COG/SOG?
>ON
OFF
6.7.2 RING
VOLUME
ADJUSTMENT
1
Select the RING VOLUME by CH knob and then display the option –
HIGH and LOW as ringer tone setting.
2
Press the CH knob key again to confirm the changes.
CH NAME
>RING VOLUME
BEEP VOLUME
INT SPEAKER
RING VOLUNE
>LOUD
SOFT
BACKLIGHT
CONTRAST
GPS / TIME
>RADIO SETUP
>CH NAME
RING VOLUME
BEEP VOLUME
INT SPEAKER
6.7.3 BEEP
VOLUME
ADJUSTMENT
1
Select the BEEP VOL by The CH knob and then display the option –
HIGH, LOW & OFF as key beep setting.
2
press The CH knob key again to confirm the changes.
CH NAME
RING VOLUME
>BEEP VOLUME
INT SPEAKER
BEEP VOLUME
>HIGH
LOW
6.7.4
INTERNAL SPEAKER ON/OFF
on/off the internal speaker in case external speaker is used.
1
Select the RADIO SETUP then INT SPEAKER.
2
Select ON (on) or OFF (off) then press The CH knob key to enable the
setting and return to the menu.
CH NAME
>DISPLAY
CH INFO
DISPLAY
>ON
OFF
Page 35
Page 36
OFF
CH NAME
RING VOLUME
BEEP VOLUME
>INT SPEAKER
INT SPEASKER
> ON
OFF