Radio Shack 15-2506 User Manual - Input
5
2.
Connect the coaxial cable from your input source to the
amplifier’s
INPUT
terminal.
3.
Connect one end of the coaxial cable to an output device
and the other end to an
OUTPUT
terminal.
4.
Attach supplied terminators to unused output terminals.
5.
Connect the supplied AC adapter to the jack on the right
hand side of the amplifier.
6.
Plug the AC adapter into a standard AC outlet. The
amplifier’s red LED lights when it has power.
7.
Turn on every device connected to the amplifier.
8.
Adjust
GAIN MIN/MAX
to get the best picture.
n
Notes:
• Do not use pliers to tighten the screw on F-connectors.
• Never connect both an outdoor antenna and the output
from the amplifier to the antenna input of your TV or VCR
without using a high isolation A/B switch. Doing so could
cause interference with other nearby receivers.
• In extremely long cable runs (distances over 200 feet),
additional amplification might be needed.
Specifications
Forward Path:
Operating Frequency Range
..........................................
54 to 1000 MHz
Gain
.....................................................................................
Up to 8 dB
Gain Adjustment Range
.................................................................
8 dB
Reverse Path:
Operating Frequency Range
...............................................
5 to 40 MHz
Insertion Loss
................................................................................
8 dB
Adapter Input Voltage
........................................................
105 to 135V
Power Usage
................................................................................
Power Line Frequency
..............................................................
50-60 Hz