Radio Shack 15-309 User Manual - page 6
6
Se
tu
p
3. Onyouruniversalremote,pressandholdSET, and then press a device key (TV,
VCR/DVD or STB). The red LED lights and stays lit, indicating that the remote is in
setup mode. Release both buttons.
n
Note: Do not hold down the keys for longer than 3 seconds or the remote enters
auto search mode.
4. Enter the first 3-digit code for your device and brand. Pause briefly between each
digit to make sure the remote receives all inputs. The red LED flashes when input is
received, then turns off if you entered the right code. If the red LED stays lit, enter
the next code for your device and brand. Repeat for all possible codes until the red
LED turns off.
5. Verify the setup by testing the remote control’s buttons and functions. If some of
your device’s functions do not respond to the remote, repeat steps 3-5 with another
code.
n
Notes:
• Ifyouwanttoquitduringdevicesetup,pressthedevicekeyorwait10secondsforthe
remote to exit setup automatically.
• Ifyouareuncertainaboutyour3-digitcodeentry,follow“Check Current Brand Code” on
page 9 to confirm your code.
• Ifyou’vetriedallthecodesforyourdeviceintheCode List and your universal remote still
doesnotwork,followstepsunder Auto Code Search or Manual Code Search.