Radio Shack 26-762 User Manual

Please read this user’s guide before

installing, setting up and using your new product

 www.radioshack.com

Thank you for purchasing your Compaq

27 MHz  RF Wireless Keyboard and Optical 

Mouse from RadioShack. This combo is specially 

designed for offi ces with up to 4096 ID codes for 

the keyboard and 2048 ID codes for the mouse, 

so you can use multiple sets in the same offi ce at 

the same time. With a single USB connection you 

can connect both the keyboard and the mouse to 

your computer.        

26-762 

27 MHz RF

Wireless Keyboard

& Optical Mouse Combo

user’s guide 

wireless keyboard   

wireless mouse 

charger / receiver

AC adapter 

CD (drivers)

2 AAA batteries (rechargeable NI-MH)

Installing the Batteries

You can power the mouse with two AAA 

batteries, and the keyboard with two AA 

batteries.

1 Remove the compartment cover from both 

the keyboard and mouse. 

2 Insert the AA batteries into the keyboard  

and the AAA batteries into the mouse. Be 

sure to match the polarity markings.

3 Replace the compartment covers.

Recharging the Batteries

Connect one end of the supplied adapter to 

the charger/receiver’s DC port and the other 

end to a standard AC outlet. Place the mouse 

in the charging stand. The red LED lights when 

the batteries are charging. The green LED lights 

when charging is complete.

When the batteries in the mouse get low, the red 

LED on the mouse fl ashes if the mouse is in use.

When the batteries in the keyboard get low, the 

battery indicator turns red.

DC port

CONNECT

Installing the Windows 98 Driver

Your mouse and keyboard work with Microsoft 

Windows 98/2000/Me/XP/NT.  Except for 

Windows 98, they should work well without 

installing the driver. If you are using Windows 

98, be sure to install the driver before 

connecting the keyboard and mouse. 

1 Exit all open Windows applications. 

2 Insert the supplied CD in your computer’s 

CD-ROM driver. Installation instructions 

will be displayed on the computer 

automatically. 

3  Follow the on-screen instructions.

Setting the Channel

The keyboard and mouse offer 2 channels, CH1 

and CH2. The receiver automatically detects the 

mouse’s channel.  If interference is caused by 

the other computers, reset the channel. 

To reset the channel on the keyboard, slide 

CH1 / CH2 on the back of the keyboard. To 

reset the channel on the mouse, remove the 

battery compartment on the mouse, and use 

a pointed object to slide the switch inside the 

compartment to CH1 or CH2. Then replace the 

cover.

If you change the channel on the mouse, you 

will need to press CONNECT on the receiver 

and the mouse. 

If you change the channel on the keyboard, the 

channel will be automatically detected.

1 Connect the charger / receiver’s USB cable 

to your computer’s USB port. 

2 Press CONNECT on the receiver. The 

receiver’s indicator lights green.

3 Press the reset key at back of the mouse and 

CONNECT on the keyboard.

4 Press CONNECT on the keyboard again. The 

keyboard enters the connecting state again, 

and the indicator lights green.

5 Press the reset button on the back of the 

keyboard. The receiver indicator light turns 

off.

When you change the channel or replace the 

batteries, you will need to repeat steps 2 and 3.

Reset button

CH1 / CH2

Changing the ID Code

To avoid interference with other Windows 

desktop sets, you will need to change the ID 

code.

1 Use a pointed object to press the reset 

button on the back of the mouse and 

press CONNECT on the right top of 

keyboard to change the code. 

2 Press CONNECT on the receiver. 

3 Press the reset key on the back of the 

mouse.

CH1 / CH2

CONNECT