Cat. No. 43-932 owner’s manual please read before using this equipment. Cid-932 talking caller id 43-932.Fm page 1 wednesday, january 12, 2000 9:56 am.
2 features your radioshack cid-932 voice caller id uses the latest caller identification technology. The cid-932 announces the caller’s telephone number only and displays all available information. The cid-932 stores and displays up to 50 single (number only) or multiple (name and number) caller id ...
3 this cid-932 has been tested and found to comply with all ap- plicable ul and fcc standards. Warning: to reduce the risk of fire or shock hazard, do not ex- pose this product to rain or moisture. Caution risk of electric shock. Do not open. Caution: to reduce the risk of electric shock, do not rem...
4 important information: • to use this caller id, you must be in an area where caller id service is available, and you must subscribe to the ser- vice. • where caller id is offered, one or more of the following options are generally available: – caller’s number only – caller’s name only – caller’s n...
5 if you use more than one phone or other device on the line, add up all of the rens. If the total is more than five (or three in rural areas), your telephones might not ring. If ringer operation is im- paired, remove a device from the line. Your cid-932 complies with part 68 of fcc rules. You must,...
6 however, your equipment might cause tv or radio interference even when it is operating properly. To eliminate interference, you can try one or more of the following corrective measures: • reorient or relocate the receiving antenna • increase the distance between the equipment and the radio or tv •...
7 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6. Slots and openings in the cabinet and the back or bottom are provided for ventilation, to protect it from overheating, these openings must not be blocked or covered. T...
8 12. To reduce the risk of electric shock, do not disassemble this product; take it to a qualified serviceman when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect re-assembly can cause electric shock when the appliance is...
9 contents preparation .......................................................................... 10 installing a battery ......................................................... 10 mounting the cid-932 ................................................... 11 attaching the bracket ......................
10 preparation installing a battery you need one 9v battery (not supplied) to provide backup pow- er for the cid-932’s memory in the event of a power failure. For the best performance, we recommend an alkaline battery, avail- able at your local radioshack store. Cautions: • use only a fresh battery ...
11 notes: • if you are not installing the battery for the first time, press any control button and disappears. • replace the battery when appears. • replace the battery within 15 seconds to avoid losing caller id information and voice vip messages that are stored in memory. Warning: dispose of old b...
12 2. Insert the hooks into the slots and gently push the cid-932 down on the bracket to snap the bracket onto the cid-932. To remove the bracket, firmly hold the cid-932 and pull up on the top of the bracket. Mounting on a wall to mount the cid-932 on a wall, you need two screws (not sup- plied) wi...
13 connecting the cid-932 the cid-932 connects to a modular phone line jack and your telephone. 1. Unplug the telephone line cord from your telephone and plug it into the cid-932’s phone jack. 2. Plug the supplied line cord into the cid-932’s line jack and the other end into the modular phone line j...
14 cautions: you must use a class 2 power source that sup- plies 9v dc and delivers at least 300 ma. Its cen- ter tip must be set to positive and its plug must fit the cid-932's dc9v jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could...
15 setting the time and date the time and date are automatically set when the cid-932 first receives a call. Subsequently, each incoming call automatically updates the time and date. To change the time and date follow these steps. 1. Hold down review 8 and 9 for about 6 seconds until the hour segmen...
16 operation receiving a call after the first ring, the cid-932 displays the caller’s telephone number (and name, if available) and the date and time of the call for about one minute, and announces the caller’s phone number (or a recorded voice vip message, if one has been as- signed to that number)...
17 caller id messages display description long distance appears if your phone company sends information indicating that the incoming call is long distance. Private call appears when the caller has blocked the number. No call there are no caller id records. Error appears when there is an error in tra...
18 reviewing caller id records the cid-932 stores the number, name, date and time of up to 50 calls, then begins replacing the oldest call record with each new one received. You can review call records, with or without voice announcements any time the cid-932 is not receiving a call. With voice anno...
19 deleting caller id records to delete an individual call record, press delete twice while the number you want to delete is displayed. The deleted num- ber disappears and the next number in the cid-932’s memory appears. To delete all call records, hold down delete for at least six seconds until no ...
20 2. Press record and begin speaking immediately after the beep. Recording appears. 3. Record your message within 2 seconds. The cid-932 immediately plays back the message, and displays the telephone number, then the message ok? Press record appears. 4. To accept the message, press record again. If...
21 3. Press play to hear the voice vip message for that num- ber. 4. If you want to re-record a message, press record, record your message within two seconds, then press record again. Repeat steps 2–4 to hear or re-record any other voice vip messages. Note: if you do not press any button for 20 seco...
22 repeat steps 2–4 for other numbers you want to delete from the vip call list. If you do not press any button for 20 seconds, the cid-932 exits the vip call list and is ready to receive new calls. Press voice vip to exit the vip call list sooner. Care to enjoy your cid-932 for a long time: • keep ...
23 the fcc wants you to know in the unlikely event that your phone causes problems on the phone line, the phone company can temporarily discontinue your service. If this happens, the phone company attempts to notify you in advance. If advance notice is not practical, the phone company notifies you a...
Radioshack a division of tandy corporation fort worth, texas 76102 01a00 printed in china limited one-year warranty this product is warranted by radioshack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from ra- dioshack company-...
