Radio Shack 49-1356 Instruction Manual

Please read this user’s guide before

installing, setting up and using your new product

 www.radioshack.com

Thank you for purchasing your DIY Color Camera with Mic 

from RadioShack. Designed for use with the RadioShack 

Video Surveillance Switchbox (49-2517), it integrates 

seamlessly with color camera observation systems at your 

home or workplace. Small and compact, your DIY Color 

Camera with Mic enables 1-way communication and for 

best resolution, automatically switches to black and white 

when light is low. 

• 

Carefully plan the camera position and cable route.

•

  Select a dust-free location providing a clear view 

of the area you want to monitor, and that is not in a 

strong light source such as direct sunlight.

• 

Do not install the camera in a location exposed to 

high humidity or rain.

• 

Select a location for the camera that has an ambient 

temperature between -4°F (-20°C) and 122°F (50°C).

• 

Plan the cable’s route so it is not close to power or 

telephone lines, transformers, microwave ovens, or 

other electrical equipment that could interfere with 

the system.

• 

If you plan to install the camera in a location with 

harsh conditions, consult with a professional installer 

and consider using a camera cover or housing (not 

included).

• 

Before permanently mounting the camera, fi rst setup 

and hold the camera in the desired location and 

check its performance on the monitor.

• 

To illuminate the camera’s viewing area, we 

recommend installing a 100-watt incandescent lamp 

or a small incandescent fl ood lamp.

49-1356

DIY Color Camera 

with Mic 

Security Camera 

User’s Guide

AC Adapter

59-Foot Cable

A/V Cable

Wall Mount Bracket

Cable Guide (10)

Drywall Anchor (2)

Sc

rew (2)

Use the wall mount bracket to mark 

the locations for the two mounting screw 

holes.

(

Optional) To run the video cable 

behind the mounting surface, drill a third 

hole at least 14 mm in diameter.

To mount the camera, loosen the 

screw from the base of the camera’s neck, 

and insert camera onto the arm of the 

wall mount bracket. Secure the camera by 

tightening the screw.

NOTE: 

If mounting to drywall, drill the drywall anchor 

holes just large enough to insert the anchors 

fi rmly, then follow the steps above.