Radio Shack In-Ear Earbud Headset Owner's Manual - page 2
2
pull the earhook off the earphone, then place the
earphone in your ear.
5. Use the clothing clip to attach the microphone to your
lapel or shirt.
6. Turn on your 2-way radio, then set your radio to the
same mode (
VOX
or
PTT
) as the headset.
±
7.
If you select
VOX
, speak into the microphone. The radio
automatically switches to transmit. When you stop
talking, the radio automatically switches to receive after
a few seconds.
±
If you select
PTT
, hold down
PTT
on the microphone
and speak into the microphone. Release
PTT
to
receive.
.
+56'0+0)
"
5
#('.;
To protect your hearing, follow these guidelines when you
use an earphone.
• Set the volume to the lowest setting before you begin
listening. After you begin listening, adjust the volume to
a comfortable level.
• Do not listen at extremely high volume levels. Extended
high-volume listening can lead to permanent hearing
loss.
• Once you set the volume, do not increase it. Over time,
your ears adapt to the volume level, so a volume level
that does not cause discomfort might still damage your
hearing.
6
4#((+%
"
5
#('6;
Do not use an earphone with your 2-way radio when
operating a motor vehicle or riding a bicycle in or near
traffic. Doing so can create a traffic hazard and could be
illegal in some areas.
If you use an earphone with your 2-way radio while riding a
bicycle, be very careful. Do not listen to a continuous
broadcast. Even though some earphones let you hear some
outside sounds when listening at normal volume levels, they
still can present a traffic hazard.
±
"
016'
"
±
"
•
Do not set the headset to VOX if
your radio does not have VOX
capability.
•
Be sure to switch your headset
off to reset it before switching
between VOX and PTT.
•
Refer to your 2-way radio’s
owner’s manual for detail about
your radio’s VOX function.