Owner’s manual please read before using this equipment. Ssm-60 stereo sound mixer with tone controls 32-12 14.Fm page 1 fr id ay, m arch 1 0, 20 00 1: 39 pm.
2 features ˆ features your radioshack stereo sound mixer is a sophisticated control center, perfect for mixing sound from up to seven audio input sources (such as a microphone, tuners, cd players, turntables, or the audio outputs from vcrs or camcord- ers). It is ruggedly constructed for home or pro...
3 preparation ˆ preparation presetting the controls warning: a sudden high output from the mixer could damage the audio devices connected to the mixer's output and your hearing, especially if you use head- phones. To avoid accidentally overdriving a channel or prematurely mixing in an au- dio input,...
4 preparation connecting the outputs to avoid sudden and unusable sound outputs from the audio devices, adjust the audio devices' controls to these set- tings before you connect the mixer's out- put jacks to the audio devices' input jacks. To play the mixer's output signal through your speaker syste...
5 operation sette tape deck, cd player, cam- corder, or vcr) to video/cd 1 and line/cd 2 . Note: you can connect any high- level output audio source to either video/cd 1 and line/cd 2 . 5. Power the mixer using the supplied 18v, 300-ma ac adapter. Cautions: you must use a class 2 power source that s...
6 operation using the controls turning on the mixer 1. Set power on/off to on to turn on the mixer's power. The meters’ light turns on. Note: to avoid a possible popping sound, always turn on the mixer before you turn on the amplifier. 2. Turn on the output amplifier and temporarily set its volume t...
7 operation 4. Set these controls as desired. 5. Set the corresponding mic , source 1 , source 2 , source 3 , or source 4 volume level control to between 8 and 10 . 6. When adding an audio input source, adjust the corresponding volume level control so you get a reading of about 0 on both output leve...
8 troubleshooting using mono/stereo when you set mono/stereo to mono , the mixer combines the left and right channels then sends the signals to the output r and l jacks. The combined output signals can be used by a monau- ral amplifier, such as a pa amplifier. When you set mono/stereo to ste- reo , ...
9 care and maintenance ˆ care and maintenance your radioshack stereo sound mixer is an example of superior design and crafts- manship. The following suggestions will help you care for your mixer so you can en- joy it for years. Keep the mixer dry. If it gets wet, wipe it dry immediately. Liquids mig...
10 specifications ˆ specifications input sensitivity/impedance: mic (dj) ................................................................................................... 3 mv, 600 ohms mic 1, 2 ................................................................................................... 3 m...
11 notes ˆ notes 32-1214.Fm page 11 friday, march 10, 2000 1:39 pm.
32-1214 03a00 printed in taiwan radioshack a division of tandy corporation fort worth, texas 76102 limited one-year warranty this product is warranted by radioshack against manufacturing defects in material and workman- ship under normal use for one (1) year from the date of purchase from radioshack...
