Rt-crc1 user’s guide copyright © 2010, radio-tone. All right reserved. 0 crossband duplex repeater controller rt-crc1 user’s guide.
Rt-crc1 user’s guide copyright © 2010, radio-tone. All right reserved. 1 thank you notice thank you for purchasing rt-crc1 crossband duplex repeater controller. Please read this user’s guide carefully before putting rt-crc1 into operation. Support for the rt-crc1 is available by email. Please direct...
Rt-crc1 user’s guide copyright © 2010, radio-tone. All right reserved. 2 preface the rt-crc1 is a state-of-the-art cross band duplex repeater controller. It is an easy of operation, cost effective and highly flexible platform for setting up bi-direction cross band duplex repeater with mobile and han...
Rt-crc1 user’s guide copyright © 2010, radio-tone. All right reserved. 3 major operating controls, terminals and their functions 1. [ status ] indicator this is a status indicator for indicating the operation status of rt-crc1. Orange color blinking : allows user to change the dtmf remote control pa...
Rt-crc1 user’s guide copyright © 2010, radio-tone. All right reserved. 4 orange color lights up : the build-in battery is being charging. Green color lights up : the build-in battery is charged up and the rt-crc1 is working on external power supply. 6. [ dc 12v ] terminal this terminal is used to co...
Rt-crc1 user’s guide copyright © 2010, radio-tone. All right reserved. 5 operation with external power supply turns off the rt-crc1 and all radio units. Connect the radio unit to the rx/tx terminals of the rt-crc1 by using correct cable. Connect the dc output of ac adapter to the [ dc 12v ] terminal...
Rt-crc1 user’s guide copyright © 2010, radio-tone. All right reserved. 6 ptt mode for [ a rx/tx ] terminal turn on the power of the radio units. Turn on the power of the rt-crc1. The [ status ] indicator of the rt-crc1 will blink with orange color for approximate 20 seconds. Push and hold the ptt sw...
Rt-crc1 user’s guide copyright © 2010, radio-tone. All right reserved. 7 key-in a 4-digit password followed by “ # ” key, for example, “ 8888# ”. The [ status ] indicator of the rt-crc1 will light up with red color, and the repeat function is turned to on now. Specifications power supply : build-in ...
