RadioLink CB86-PLUS User Manual - page 3
一、Function:
CB86S Technical data:
Input Voltage:Voltage range 10.5-15V(The charge will not work with wrong input power
polarity, warning when input power voltage over 15V and less than 10.5V, temperature
over 48C° will auto-start fans)
Voice Indicator:ON/OFF
Time setting: Charging or discharging time from 0 to 99 minutes and 59 second
Charging Mode: Cycle charging, parallel charging, discharging, voltage measure
Charging voltage: 0.00V-4.23V,setting precision 0.01V;
Discharging voltage: 2.00-4.23V,setting precision 0.01V;
Charging current:0.0-6.0A,setting precision 0.1A;
Discharging current: 1.05A
二、Operation:
1、Connection
Connect the charger with a DC power source of output voltage 10.0-5V and current not
less than15A.
Balance plug:
CB86S contains 8 balance ports, it can charge 8pcs 6-cell Lithium battery at the same
time connecting 1S-6S batteries freely by the following sketch. Mind the polarity of
Input
Voltage
Charging
Mode
Voice
Indicator
Charging
Time
Final Voltage
Charging Current
START/STOP:
To start or stop
present status
“+/▲”,“-/▼”: Add or reduce
present data (on charging or
discharging mode)
SET:Set data of the charger
(Forbidden on charging
and discharging status)