RadioLink T4EU User Manual

User Manual for RadioLink T4EU 

4 Channel 2.4Ghz Radio Control System 

Transmitter (T4EU) 

Receiver (R7EH) 

Channels:                            4-Channel 

Channels:                             7 Channels 

Transmitting Frequencies:   2.4Ghz 

Receiving Frequencies:        2.4Ghz 

Modulation Type:                 2.4Ghz FHSS 

Input Power:                         4.8v to 6.0v  

Minimal Current Drain:     Approx.. 100mA 

Receiving Range:   500 yds. Ground, 1000 

yds. Air 

Input Power:                    9.6v NiCd Battery 

Output Power:                  

Binding The Receiver 

1.  Fully charge the transmitter batteries.

2.  Turn on the transmitter power first, then power on the receiver

3.  Press the bind button on the receiver, hold for one second and release.

4.  The LED in the receiver will flash several times and then go solid, indicating that 

the receiver is bound to the transmitter.

5.  Power off the receiver, then turn off the transmitter power.

Installing The Receiver 

1.  Install the receiver in your aircraft, away from other components such as the ESC 

and the motor.

2.  Common receiver channel connections are as follow:

Channel 1:   Rudder (on three channel plane) or Ailerons (on four channel 

plane). 

Channel 2:   Elevator 

Channel 3:   Throttle 

Channel 4:   Rudder (on four channel plane) 

Channel 5:   Landing Gear or Flaps* 

Channel 6:   Landing Gear or Flaps* 

Channel 7:   Receiver Battery Pack or UBEC* 

*Channels 5, 6 & 7 are not available when the receiver is used with the 

T4EU radio transmitter.