RadioPopper JrX Owner's Manual - Compatible Hardware:
Compatible Hardware:
The JrX System has been tested and found to be compatible with the following flash hardware. See our website for
updates as we test and certify compatibility with additional hardware.
Transmitter:
May be used with any camera with a standard hotshoe mount. May also be used via an external PC Sync cable ap-
propriate to your particular brand of camera.
Receiver General Triggering:
JrX Receiver will trigger most lighting devices via the standard sync connector.
Receiver “Studio” Data Port Triggering:
JrX Receiver “Studio” version enables the ‘telephone’ style Data Port. This port is compatible with all current model
studio ligthing system from Alien Bees, White Lightning, and Zeus.
PX Triggering / Receiving:
The JrX Transmitter will trigger PX Receiver units tuned to the same radio channel. The PX Transmitter will trigger JrX
Receiver units tuned to the same radio channel.
Specifications:
Both JrX Transmitter and JrX Receiver have similar specifications as follows.
Dimensions : 2.0” x 2.0” x 0.8” (50mm x 50mm x 20mm)
Weight: 2.0 ounces / 60 grams (Including battery and antenna during normal operation)
Battery: One “CR123” Size Battery, 3.0 volt
Battery Life: Approx 50 Hours total power-on time per battery.
Radio Frequency: 902-928 Mhz, ISM Band
Radio Range: 300 ft to 1750 ft depending on conditions and environment.
RadioPopper JrX Radio Wireless System
Page 6