1. DL manuals
  2. RadiSys
  3. Motherboard
  4. Endura GL815E
  5. Product Manual

RadiSys Endura GL815E Product Manual

Summary of Endura GL815E

  • Page 1

    Endura gl815e product manual www.Radisys.Com world headquarters 5445 ne dawson creek drive ● hillsboro, or 97124 usa phone: 503-615-1100 ● fax: 503-615-1121 toll-free: 800-950-0044 international headquarters gebouw flevopoort ● televisieweg 1a nl-1322 ac ● almere, the netherlands phone: 31 36 536559...

  • Page 2

    Gl815e endura motherboard product manual page 2 of 51 revision history revision revision history date 1.0 first release december 2000 1.1 added support for 850 mhz celeron and 1.0 ghz pentium iii added support for build-dependant on-board speaker added section on power supply selection added mtbf an...

  • Page 3

    Gl815e endura motherboard product manual page 3 of 51 safety & approvals notices battery this product contains a lithium cell. When removing or replacing the lithium cell, do not use a conductive instrument as a short- circuit may cause the cell to explode. Always replace the cell with one of the sa...

  • Page 4

    Gl815e endura motherboard product manual page 4 of 51 fcc compliance statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interferenc...

  • Page 5

    Gl815e endura motherboard product manual page 5 of 51 contents 1 overview................................................................................................................. 7 1.1 motherboard layout............................................................................................

  • Page 6

    Gl815e endura motherboard product manual page 6 of 51 3.8.1 motherboard power consumption ...............................................................................28 3.8.2 power supply selection ...............................................................................................29 3...

  • Page 7

    Gl815e endura motherboard product manual page 7 of 51 1 overview the gl815e is an atx form factor motherboard based around an intel celeron or pentium iii processor and an intel 815e family chipset. It integrates video, audio, system monitoring and ethernet on a 12.0 x 7.5-inch board and is targeted...

  • Page 8

    Gl815e endura motherboard product manual page 8 of 51 1.1 motherboard layout the figure below shows the layout of the gl815e motherboard with the major components identified. 17 36 37 38 39 40 41 42 43 44 45 46 3 1 2 4 5 6 7 8 9 10 12 11 13 14 15 16 18 19 20 21 22 23 24 25 26 27 29 28 30 31 32 33 34...

  • Page 9

    Gl815e endura motherboard product manual page 9 of 51 motherboard component identification 1 clock generator 24 atapi telephony audio header 2 pc100/pc133 dimm sockets 25 gpio header 3 pga370 socket for processor 26 external audio codec support 4 diskette header 27 slot 2 – pci 2.2 5 graphics & memo...

  • Page 10

    Gl815e endura motherboard product manual page 10 of 51 1.2 block diagram the figure below shows a block diagram of the gl815e motherboard. Intel celeron or pentium iii processor pga370 graphics & memory controller (gmch) i/o controller hub (ich2) isa bridge (ns87200) super i/o (pc87366 lpc) dimm 0 s...

  • Page 11

    Gl815e endura motherboard product manual page 11 of 51 1.3 product options the table below lists the product options available. Functions gl815e-v gl815e-l gl815e-fpl audio yes yes yes flat panel interface no no yes flat panel rear connector 1 no no no lan no yes yes on-board speaker no no no superc...

  • Page 12

    Gl815e endura motherboard product manual page 12 of 51 operating mode normal configure recover 1.4 configuration the majority of the configuration of the motherboard is done through the setup utility built into the bios – discussed later in this document. There is, however, one jumper that controls ...

  • Page 13

    Gl815e endura motherboard product manual page 13 of 51 1.4.2 front panel connections the primary controls and indicators for the motherboard are connected via the front panel connector using either a single ribbon cable to a 'front panel' assembly, or using a number of small pc- standard connectors....

  • Page 14

    Gl815e endura motherboard product manual page 14 of 51 2 motherboard description 2.1 processor the gl815e motherboard supports intel celeron and pentium iii processors in a pga370 package (fc-pga). The table below lists the supported processors. An on-board voltage regulator generates the voltage fo...

  • Page 15

    Gl815e endura motherboard product manual page 15 of 51 2.3 chipset the gl815e motherboard is based around an intel 815e chipset comprising two parts - • graphics and memory controller hub (gmch). This includes the processor interface, a high- performance 3d graphics controller and the system memory ...

  • Page 16

    Gl815e endura motherboard product manual page 16 of 51 2.4.2 video modes the intel 815e chipset supports a wide variety of video modes. The drivers for specific operating systems support a subset of these modes. The table below lists the video modes supported by the windows and linux drivers. Resolu...

  • Page 17

    Gl815e endura motherboard product manual page 17 of 51 2.6 network the gl815e supports an optional 10/100 ethernet controller based around the controller integrated within the chipset and an intel gd82562et transceiver. An rj45 connector located on the rear panel integrates two led indicators to pro...

  • Page 18

    Gl815e endura motherboard product manual page 18 of 51 2.9.1 serial ports the gl815e motherboard supports two 16c550-compatible serial ports that can operate at speeds of up to 115.2kbps. Serial port 1 is located on the rear panel whilst serial port 2 is via a header. Each port can be assigned as co...

  • Page 19

    Gl815e endura motherboard product manual page 19 of 51 usb channel connector location controller channel 0 rear i/o (bottom) controller 1 channel 1 rear i/o (top) controller 1 channel 2 header controller 2 channel 3 agp slot controller 2 the bios supports the use of a usb keyboard and/or mouse in li...

  • Page 20

    Gl815e endura motherboard product manual page 20 of 51 isa slots the motherboard provides 2 isa slots, one of which is shared with a pci slot. The national semiconductor ns87200 provides the pci to isa bridge. In order to fully support the isa bus power rails, the atx power supply should provide –5v...

  • Page 21

    Gl815e endura motherboard product manual page 21 of 51 processor type processor speed operating voltage intel celeron 566 mhz 1.50v, 1.70v or 1.75v intel celeron 733 mhz 1.65v, 1.70v or 1.75v intel celeron 850 mhz 1.70v or 1.75v intel pentium iii 600 mhz 1.65v, 1.70v or 1.75v intel pentium iii 733 m...

  • Page 22

    Gl815e endura motherboard product manual page 22 of 51 2.15 power management the gl815e motherboard implements a number of power management features with software support for apm and acpi. Where an operating system does not support acpi, the motherboard defaults to using apm. An apm driver is requir...

  • Page 23

    Gl815e endura motherboard product manual page 23 of 51 2.16 indicators the motherboard supports a single dual-color led indicator that is used to show both power and message waiting status. It is possible to use a single-color led although some functionality is lost. The table below describes how th...

  • Page 24

    Gl815e endura motherboard product manual page 24 of 51 3 specifications 3.1 regulatory emc compliance the table below lists the emc regulations the gl815e motherboard is designed to meet when correctly installed in a suitable chassis. Regulation fcc class b (title 47 of code of federal regulations, ...

  • Page 25

    Gl815e endura motherboard product manual page 25 of 51 3.4 thermal the ambient operating temperature range for the motherboard is 0 - 55°c but the selection of processor and heatsink (or fansink) can reduce the system operating range. Intel celeron processors have a minimum operating temperature of ...

  • Page 26

    Gl815e endura motherboard product manual page 26 of 51 3.7 mechanical 3.7.1 motherboard the gl815e motherboard meets the atx motherboard interface specification, version 2.03. It measures 12.0 x 7.5 inches and is manufactured using a 4-layer pcb with components on the topside only. The screen-printi...

  • Page 27

    Gl815e endura motherboard product manual page 27 of 51 3.7.2 i/o shield an i/o shield is available for the gl815e when used in a standard atx chassis and is illustrated below. The shield press-fits into the chassis shield aperture. The shield illustrated includes the rj45 ethernet aperture but not t...

  • Page 28

    Gl815e endura motherboard product manual page 28 of 51 3.8 electrical 3.8.1 motherboard power consumption the motherboard power consumption is highly dependent on the processors, memory and devices attached and also on the software that is running and the power state that the board is in. The figure...

  • Page 29

    Gl815e endura motherboard product manual page 29 of 51 3.8.2 power supply selection the gl815e motherboard is designed to operate in conjunction with an atx compatible power supply, as defined in section 4.2 of the atx 2.03 specification. The provision of a 5v standby power rail is optional but, if ...

  • Page 30

    Gl815e endura motherboard product manual page 30 of 51 4 motherboard bios 4.1 configuration the motherboard bios includes a setup utility that can be used to both view and modify the board’s configuration. The settings are stored in cmos ram with the default settings held in the flash rom. To start ...

  • Page 31

    Gl815e endura motherboard product manual page 31 of 51 4.2 update and recovery this section describes how to update the code and data held in the bios rom. The process should be undertaken with care and must not be interrupted. A recovery mechanism is also described that enables a corrupted bios rom...

  • Page 32

    Gl815e endura motherboard product manual page 32 of 51 if the update operation fails for any reason (if it was interrupted, for example), and the motherboard will no longer operate, then the bios must be recovered. 4.2.3 creating a bios recovery diskette follow the steps below. You need a pc with mi...

  • Page 33

    Gl815e endura motherboard product manual page 33 of 51 4.3 customization there are a number of features of the bios that can be customized and the software to accomplish this is contained within the bios oem kit zip file that can be obtained from the manuals, drivers & bios section on the radisys we...

  • Page 34

    Gl815e endura motherboard product manual page 34 of 51 4.4 bios error indications once the motherboard powers-up the bios code runs power-on-self-test software to check that the motherboard is operating correctly. During this process, the code writes an 8-bit value to an error port at various code c...

  • Page 35

    Gl815e endura motherboard product manual page 35 of 51 bios post checkpoint codes 26h enable a20 90h initialize hard disk controller 28h autosize dram 91h initialize local bus hard disk controller 29h initialize pmm 92h disable unused pci clocks 2ah clear 512kb base ram 93h build mptable for multipr...

  • Page 36

    Gl815e endura motherboard product manual page 36 of 51 bios post checkpoint codes 56h enable keyboard c1h initialize pem 58h test for unexpected interrupts c2h pem log 59h initialize pds c3h pem display 5ah display prompt "press f2 to enter setup" c4h pem sys error initialization 5bh cpu cache off c...

  • Page 37

    Gl815e endura motherboard product manual page 37 of 51 5 customer support radisys online support can be found at www.Radisys.Com and includes device drivers, bios updates, support software and documentation. See the manuals, drivers & bios section. Radisys hotline numbers for the us and canada are s...

  • Page 38

    Gl815e endura motherboard product manual page 38 of 51 appendix a appendix a appendix a appendix atechnical reference technical reference technical reference technical reference a.1. I/o map address (hex)* description 0000 – 000f dma controller 1 0020 – 0021 interrupt controller 1 0040 – 0043 timer ...

  • Page 39

    Gl815e endura motherboard product manual page 39 of 51 address (hex)* description ffa0 – ffa7 primary ide bus master registers ffa8 – ffaf secondary ide bus master registers dynamically assigned usb controller (32 locations on 32-byte boundary) dynamically assigned smbus controller (16 locations on ...

  • Page 40

    Gl815e endura motherboard product manual page 40 of 51 a.3. Pci device assignments device idsel bus number device number function number chipset host bridge - 0 0 0 agp bridge - 0 1 0 graphics controller - 0 2 0 pci bridge - 0 30 0 lpc bridge (includes dma, timers, pic, apic, rtc, power & system man...

  • Page 41

    Gl815e endura motherboard product manual page 41 of 51 a.5. Isa interrupt allocation the isa interrupts are allocated as described in the table below. Interrupt description irq0 system timer irq1 keyboard controller irq2 cascade interrupt irq3 com2, com1 or unassigned irq4 com1, com2 or unassigned i...

  • Page 42

    Gl815e endura motherboard product manual page 42 of 51 a.7. Bios organization the bios rom is a 4mbit device containing eight symmetrical 64kb blocks. The diagram below shows how the rom is used to store code and control information. The addresses shown refer to the rom image at the top of the 4gb-a...

  • Page 43

    Gl815e endura motherboard product manual page 43 of 51 appendix b appendix b appendix b appendix bconnector descriptions connector descriptions connector descriptions connector descriptions b.1. Connector part numbers the various motherboard connectors are listed in the table below along with the pa...

  • Page 44

    Gl815e endura motherboard product manual page 44 of 51 b.2. Agp expansion slot pin signal pin signal pin signal pin signal a1 +12v b1 usboc# a34 vddq3.3 b34 vddq3.3 a2 typedet# b2 +5v a35 ad22 b35 ad21 a3 reserved b3 +5v a36 ad20 b36 ad19 a4 usb- b4 usb+ a37 gnd b37 gnd a5 gnd b5 gnd a38 ad18 b38 ad...

  • Page 45

    Gl815e endura motherboard product manual page 45 of 51 b.3. Pci expansion slot pin signal pin signal pin signal pin signal a1 trst# 3 b1 -12v a32 ad16 b32 ad17 a2 +12v b2 tck 3 a33 +3.3v b33 c/be2# a3 tms 4 b3 gnd a34 frame# b34 gnd a4 tdi 4 b4 tdo 5 a35 gnd b35 irdy# a5 +5v b5 +5v a36 trdy# b36 +3....

  • Page 46

    Gl815e endura motherboard product manual page 46 of 51 b.4. Isa expansion slot pin signal pin signal pin signal pin signal a1 iochk# b1 gnd c1 sbhe# d1 memcs16# a2 sd7 b2 reset c2 la23 d2 iocs16# a3 sd6 b3 +5v c3 la22 d3 irq10 a4 sd5 b4 irq9 c4 la21 d4 irq11 a5 sd4 b5 -5v c5 la20 d5 irq12 a6 sd3 b6 ...

  • Page 47

    Gl815e endura motherboard product manual page 47 of 51 b.5. Atx power supply 11 20 1 10 pin signal pin signal 11 +3.3v 1 +3.3v 12 -12.0v 2 +3.3v 13 gnd 3 gnd 14 ps_on# 4 +5.0v 15 gnd 5 gnd 16 gnd 6 +5.0v 17 gnd 7 gnd 18 not used 8 pwr_ok 19 +5.0v 9 +5.0vsby 20 +5.0v 10 +12.0v b.6. Front panel header...

  • Page 48

    Gl815e endura motherboard product manual page 48 of 51 b.9. Serial port 2 1 9 2 8 pin signal pin signal 1 dcd 2 dsr 3 rxd 4 rts 5 txd 6 cts 7 dtr 8 ring 9 gnd 10 key b.10. Vga monitor 1 5 11 15 6 10 pin signal pin signal 1 red 9 +5v 2 green 10 gnd 3 blue 11 reserved 6 4 reserved 6 12 sda 5 gnd 13 hs...

  • Page 49

    Gl815e endura motherboard product manual page 49 of 51 b.15. Keyboard header 4 1 pin signal 1 +5v 2 data 3 gnd 4 clock b.16. Mouse header 4 1 pin signal 1 +5v 2 data 3 gnd 4 clock b.17. General purpose i/o 1 11 2 12 pin signal pin signal 1 gpio20 2 gpio21 3 gpio22 4 gpio23 5 gpio24 6 gpio25 7 gpio26...

  • Page 50

    Gl815e endura motherboard product manual page 50 of 51 b.19. Diskette drive header 1 33 2 34 pin signal pin signal 1 gnd 2 densel 3 gnd 4 not used 5 key 6 drate0 7 gnd 8 index# 9 gnd 10 mtr0# 11 gnd 12 ds1# 13 gnd 14 ds0# 15 gnd 16 mtr1# 17 gnd 18 dir# 19 gnd 20 step# 21 gnd 22 wdata# 23 gnd 24 wgat...

  • Page 51

    Gl815e endura motherboard product manual page 51 of 51 b.24. System fan 3 1 pin signal 1 gnd 2 power 3 tach# b.25. Line in and out jacks pin signal tip left audio ring right audio sleeve gnd b.26. Mic jack pin signal tip mic mono input ring bias voltage sleeve gnd b.27. External audio codec 7 1 pin ...