1. DL manuals
  2. Radius
  3. Radio
  4. m1225
  5. Operator's Manual

Radius m1225 Operator's Manual

Other manuals for m1225: Operator's Manual

Summary of m1225

  • Page 1

    Operator guide for m1225 mobile radio guide de l'utilisateur pour les radios mobiles m1225 copyright © 1997 motorola, inc. All rights reserved © motorola, inc., 1997. Tous droits réservés. 6880904z85-o.

  • Page 2: Safe Mounting of The Radio

    1 this operator guide contains the information needed to identify the controls and visual indicators, oper- ation, and troubleshooting for the m1225 mobile radio. Information about the radio’s visual and audible indicators is highlighted and illustrated with icons. Information about radio safety, mo...

  • Page 3: Controls

    2 controls a . On/off/volume knob b . Channel up/down button c . Scan button d . Option buttons (a, b, c) e . Microphone push-to-talk (ptt) button visual indicators 1 . Light-emitting diode (led) 2 . Transmit ( ) / receive ( ) icon 3 . Scan icon 4 . Monitor icon 5 . Option icons 6 . Alphanumeric cha...

  • Page 4: Turn The Radio On/off

    3 turn the radio on/off turn the on/off/volume knob until it clicks. If the radio is operating properly, a short, high-pitched tone sounds. If the radio is not operating properly, a continuous low-pitched warning tone sounds. Set volume using the on/off/volume knob, adjust the volume to a comfortabl...

  • Page 5: Receive

    4 directives d'utilisation de base receive press or to select the desired channel or press and hold to scroll through the channels. Make sure the ptt is released. Listen for voice activity. Blinks when the radio is receiving. Transmit note: in the united states, fcc regulations require you to monito...

  • Page 6: Time-Out Timer (T.O.T.)

    5 time-out timer (t.O.T.) limits the amount of time you have to transmit. Preprogrammed from 1 to 255 seconds or off. When you reach the time limit, a continuous, low-pitched tone sounds (until you release the ptt) and your transmission is cut off. Busy channel lockout several groups of radio users ...

  • Page 7: User Programmable Scan

    6 user programmable scan your radio has the capability to add or delete channels in your scan list. The radio cannot be in the scan mode when you program the scan list. Press and hold . Two high-pitched tones sound, indicating that you are in the user programmable scan mode. “scan prg” and your curr...

  • Page 8: Scan

    7 scan your radio is equipped with scan, which allows you to search for activity on multiple channels. When activity is found on a channel, the radio locks on and suspends scanning. Note : scan will always search for and go directly to a priority channel, even if scan has locked onto another channel...

  • Page 9: Scan (Contõd.)

    8 scan (contÕd.) • nuisance channel delete – temporarily deletes an unusually busy channel from the scan list. You can delete channels only while the radio is in channel scan mode and is receiving activity on the nui- sance channel. You cannot delete your “home channel” or “priority channel.” to del...

  • Page 10: Repeater/talkaround

    9 your dealer can program each of the three option buttons (a, b, or c) to perform one of the fol- lowing eight options. 1. Repeater/talkaround repeater/talkaround mode gives you the option of using a repeater system for extended range or talk- ing to other radio users in direct range of your radio ...

  • Page 11: Monitor On-Off/volume Set

    10 3. Monitor on-off/volume set monitor/volume set allows you to monitor the channel for activity when pl is enabled (same as taking the microphone off hook) or to set the volume. Your radio defaults to monitor off mode when it is turned on. To monitor note: in the united states, fcc regulations req...

  • Page 12: Telephone Access/deaccess

    11 3. VŽriÞcation marche-arr•t / rŽglage du volume (suite) réglage du volume appuyez sur votre bouton d'option (a, b ou c) vérification / réglage du volume prépro- grammé et tenez-le enfoncé pendant une seconde. Vous entendrez des « parasites ». Réglez le volume à un niveau d'écoute agréable à l'aid...

  • Page 13: Hi/low Power

    12 5. Advantageª board enable/disable advantage board enable/disable allows you to turn the features of an advantage board on and off. Your radio defaults to advantage board disable mode when it is turned on. 6. Hi/low power hi/low power allows you to toggle between hi and low power mode. Your radio...

  • Page 14: Troubleshooting

    13 symptom problem solution radio is “dead.” no power to radio. Check vehicle battery and all cable connections. If all are o.K., contact your local dealer for service. Low-pitched continuous tone when turning the radio on. Internal defect. Press and release the ptt to stop tone. Contact your local ...