Radius 150
1 accessories & content 2 installation 2 wall mounting 3 feature list 3 message waiting 4 headset 4 headset hi-lo volume 4 mute 5 redial 5 pause 5 recall 5 one and two-touch memories 6 the following items are included in this package of the radius 150 analogue business feature phone :- - phone base ...
2 1) insert one end of the curly handset cord into the socket on the handset and the other end into the socket on the left hand side of the base unit (next to the telephone cradle). 2) insert the line cord into the socket marked line on the rear of the base unit. 3) desk top use – fit the desk/wall ...
3 1. Handsfree dialling 2. Headset socket (2.5mm) 3. Volume hi-lo switch for headset 4. Desktop or wall mountable 5. 9 one touch memories 6. 10 two touch memories 7. Redial (32 digits) 8. Recall button 9. Tone dialling 10. Mute button with led 11. Electronic ringer hi-lo-off switch 12. Message waiti...
4 to make a call using handset: lift the handset and wait for the dial tone then dial the desired telephone number. To end a call, put the handset back to the cradle of the base unit, or push the hook switch. Message waiting there are 2 types of message waiting used by large pbx phone systems and th...
5 connect the headset to the 2.5mm headset socket on the right side of the phone. Press the button, to make and receive calls. Press button again to end the call. Note : you can switch to handset operation by simply picking up the handset. Headset hi-lo switch on the rear of the phone is a headset h...
6 pause. - dial the caller number. Recall (flash) this is used to transfer the calls between extensions when the phone is connected behind a pbx. Consult your technical team or service provider, if you have difficlty in transferring calls, as the flash timing of the pbx and the phone have to be matc...
7 ..
