Gage104u40 series 4 bay 3.5” sas/ sata trayless enclosure 1u desktop type user manual t:1.626.303.8885 f:1.626.301.0588 e:sales@istarusa.Com w:www.Istarusa.Com.
Package contents 1. 4-bay enclosure x1 2. Power cord x1 3. Usb 3.0 cable x1 4. Esata cable x1 5. 1394a cable x1 6. 1394b cable x1 7. User manual x1 8. Rubber feet x4 hardware guide *minisas unit includes 1, 2, 7, 8 *esata unit includes 1, 2, 4(four cables), 7, 8 *usb/esata/firewire includes 1 to 8 f...
Operation -hard disk installation 1.Open the door 2. Insert hard drives to the bottom 3. Close the door -pull out the hdd pull the hdd release latch, the hdd will be pushed out, and pull out the hdd carefully..
-connect to a computer connect data cable and power cord before turn on the unit. * for gage104u40sl-sauf unit, do not use more than one connection at the same time, either usb, esata, or firewire. -led indicators -set button (gage104u40sl-sauf only) -system (for gage104u40sl-sauf only. Other models...
Raid mode (gage104u40sl-sauf only) clear mode (down-down–down) clear mode is the default mode. If you want to change from clear mode to other raid modes, please follow the procedure below. 1) turn off the power 2) adjust the raid switch 3) press and hold the set button and press the power button at ...
Rebuild mode (gage104u40sl-sauf only) the hdd access led will be off and system will keep beeping when there is a hdd failure. Press the set button to stop the beep. Rebuild operation after turn off the power and change the failed hdd, system will start the rebuilding operation when the power is on ...
