- DL manuals
- Raidon
- Storage
- iR2620-2S-S2
- User Manual
Raidon iR2620-2S-S2 User Manual
Summary of iR2620-2S-S2
Page 1
V.2.2 (jun, 2011) intank series ir2620-2s-s2 / sr2611-2s-s2r user manual ir2620-2s-s2 sr2611-2s-s2r.
Page 2: Index
Index chapter 1 check package contents and accessories..................................... 3 chapter 2 hardware introduction..................................................................... 4 chapter 3 precaution before usage................................................................. 5 ch...
Page 3: Accessories
Chapter 1 check package contents and accessories ir2620 / sr2611 system includes the following: item quantity ir2620 / sr2611 1 / 1 internal rs232 cable 1 external rs232 cable 1 sata cable 1 cd 1 accessory bag ir2620 : includes 6 of screws for device, 6 of screws for hdd tray, and 2 of keys for key ...
Page 4
Chapter 2 hardware introduction ir2620 front panel sr2611 front panel 1 lcd display 2 led of failure alarm 1 lcd display 2 led of failure alarm 3 led of pri hdd 4 led of sec hdd 3 led of pri hdd 4 led of sec hdd 5 mute button 6 led of pri hdd 5 mute button 6 key lock 7 led of sec hdd 8 key lock ir26...
Page 5: 1. Hardware Requirement
2) sr2611: a. Led of pri / sec hdd will flash yellow when the data is accessed from the hard drive. B. Led of failure alarm will light red when hd failed, temperature is higher than 60ºc or fan fails. 2. Mute button : press to turn on mute function, to shut off the buzzer alarm, just press the botto...
Page 6
Chapter 4 hardware installation procedure 1. Install your hard disks into the removable trays and secure them with the screws from accessory kit. This will protect your hard disk from any unnecessary movement. Ir2620 sr2611 2. Once the hard disks have been installed, insert the removable trays into ...
Page 7: Computer
Chapter 5 connecting ir2620 / sr2611 to your computer 1. Connect dc12v&5v power cables and sata cables to ir2620 / sr2611. 2. Connect sata cable to sata port on the motherboard. Internal rs232 cable external rs232 cable sata cable power supply connector ir2620 real panel internal case sr2611 real pa...
Page 8
2. We do not recommend users to disassemble the device without proper instructions and authorization. The manufacture warranty will not cover the damages caused by unauthorized disassembling. 3. To prevent the device from malfunction, please make sure the device is connected with a direct and dedica...
Page 9: Chapter 7 Computer Set Up
Chapter 7 computer set up when the hardware setup for ir2620 / sr2611 is complete, you are now ready to turn the machine on. 1. After the hardware installation is complete, the ir2620 / sr2611 will be treated as one single hard drive. Set the hard drive to auto in the computer’s bios. When the compu...
Page 10
Chapter 8 hard disk status on lcd screen 1. Normal hard drives 2. Primary hard drive is failure, but secondary hard drive is normal 3. Primary hard drive storage capacity larger than secondary hard drive 4. Secondary hard drive storage capacity larger than primary hard drive 5. Rebuilding 6. Overhea...
Page 11
Chapter 9 data rebuilding operation the hard drive hot swap and auto rebuilding functions are available. (the hot swap & auto rebuilding functions are applicable in) 1. Off-line back up when the data is stored within ir2620 / sr2611, the user can remove one of the hard drives from ir2620 / sr2611 as...
Page 12: Firmware Update
6. When the rebuilding is fully completed, the lcd display screen will again display the following messages: 7. When ir2620 /sr2611 is overheating, “t” will be displayed on the lower right-hand cor ner of screen (as shown in illustration) 8. When cooling fan module is not functional, “f” will be dis...
Page 13
2. Firmware upgrade you may update the firmware via this gui, simply click on “load” button to locate the firmware file to proceed. After update is finished, you may restart the power properly to operate with newly updated firmware. Caution : any random firmware updates may cause device in malfuncti...
Page 14
3. E-mail notify configuring an e-mail address for notification of drive malfunctioning or being removed. 3-1 setup 1) insert “outgoing” smtp and e-mail name and address. 2) if it is passwords required, select the option “smtp login authentication” and insert the passwords. 3) when the configuration...
Page 15
4. About indicates gui management software version gui monitoring software & fw updating 15.
Page 16: Hard Drive Failure
Appendix: trouble shooting / q&a unstable system after connecting ir2620 / sr2611 q: after installing ir2620 / sr2611, we are unable to start the computer or the computer can not locate ir2620 / sr2611 upon startup. A: 1. Please check whether the readings on the ir2620 / sr2611 lcd display screen ap...
Page 17: Other Possible Situations
Q: my hard drive is obviously operating properly but why is it shown as failed in the ir2620 / sr2611 display? A: ir2620 / sr2611 uses more strict requirements and standards to examine the bad sectors in the hard drive. The user can first overwrite the bad sector on a pc before placing the hard driv...
Page 18
Q: how to turn on and off the buzzer? A: 1. The manufacture default setting for the buzzer in ir2620 / sr2611 is buzzer on. 2. The user can use any pointed materials to push the bottom on the front dash board to turn on and off the buzzer. 18 copyright declaration.