St7610-4s-s2p user manual version : 2.0 (april, 2009).
E n g l i s h contents chapter 1 installation ................................................................... 4 1.1 accessories check ............................................................... 4 1.2 hardware introduction ............................................................ 4 1.3 har...
E n g l i s h chapter 1 installation 1.1 accessories check after you open the outer package, make sure that the following accessories are contained in the package: ‧ st7610 series product body ‧ ac power cord ‧ esata cable ‧ user manual ‧ accessories kit make sure the related accessories and the pro...
E n g l i s h 1.3 hardware installation after verifying that the product body and related accessories are not missing or damaged, please follow the following procedures to complete the hardware assembly step 1 open the outer package and take out the product body. (make sure the related accessories a...
E n g l i s h step 5 connect the cables to the corresponding ports.. Then connect the power cord. Step 6 hardware installation is completed. You can power on the system to start the related setup and application. Note : 1. Make sure your sata adapter card supports the port multiplier function, if no...
E n g l i s h step 2 enter the “disk management” and select the newly added hd drive, and start “initializing” the hd. After the initialization is done, you can “format” the hd as a desired one according to your preference or need. After the formation, you can start using the hd device installation ...
E n g l i s h appendix a questions & answers q : does st7610 series require additional driver upon different operating systems? A : no. Users do not need any additional driver in different operating systems. Raidon built-in systems support a variety of operating systems, e.G. Window xp, linux and ma...
