Rail King L-1 MIKADO Operating Instructions Manual - Reset to Factory Defaults:

9

RailKing Y6b 2-8-8-2 Steam Engine

Lock into a Directional State:

You can lock your engine into a directional state (forward, neutral, or reverse)

so that it will not change directions.  To do this, put the engine into the

direction you want (or into neutral to lock it into neutral), run it at a very slow

crawl (as slowly as it will move without halting), and quickly but firmly press

the Horn button once followed immediately by three presses of the Bell button. 

Two horn blasts will indicate that the engine has made the change.  The engine 

will not change direction (including going into neutral) until you repeat the 1

horn, 3 bells code to return the engine to its normal state, even if the engine is

kept without power for extended periods of time.

Reset to Factory Defaults:

To override the settings you currently have assigned to the engine and reset it

to its factory defaults, while in Neutral press the Whistle button once, followed 

immediately by five quick pushes of the Bell button. Two whistle blasts will

indicate that the engine has made the change.

Automatic Sounds:

Certain Proto-Sound 2.0 sound effects automatically play in programmed

conventional mode conditions:

• Squealing Brakes play any time the engine’s speed decreases rapidly.

• Cab Chatter plays at random intervals when the engine idles in neutral.

• Engine Start-up and Shut-down sounds play when the engine is initially

powered on or is powered off for five seconds or more.