Rail King SANTA FE STEEL RAIL FREIGHT HAULER 2-6-0 Operating Instructions Manual - Railking
4
RailKing 2-6-0 Operating Manual
RAILKING
Quick Start Operating Instructions
Track and Power
Although MTH Electric Trains manufactures its own track and
transformers, you can run your locomotive on 0-27 or wider-radius O
gauge track wired to draw power from any of the standard compatible
AC transformers listed in the chart on page [ ]. Be sure your track is in
good condition—clean and securely connected—to keep the locomotive
running and to prevent derailments. If you intend to utilize the
RiteTrax® track sections included in the set, see the directions below.
Setting Up the RiteTrax® Oval
Unlike other O Gauge track systems, each RiteTrax® track section
features a realistic built-in roadbed base, solid nickel-silver track rails and
realistic railroad ties all designed to give the owner an authentic looking
track system. In addition, each RiteTrax® track section employs the use
of quick-connect connectors instead of track pins or railjoiners to
assemble the track sections to one another. The quick connectors and
built-in base allow RiteTrax® track sections to be setup anywhere,
including a carpeted surface without the need for track nails or the
worry of carpet stains.
The lighted lockon included in your set snaps into any RiteTrax® track
section roadbed and functions as the interface between the track and
the transformer. Each RiteTrax® track section includes a “knock-out” in
the roadbed that must be removed to reveal the opening for the lighted
lockon. To remove this knock-out grab the knock-out with a pair of
pliers and gently twist the knock-out until it snaps away from the
-7
50
DI
RE
CT
IO
N
BE
LL
HO
RN
WH
IS
TL
E
PO
WE
R
R
K
AI
L
IN
G
By
MT
H
El
ect
ric
Tr
ain
s
®
TRA
NSF
ORM
ER
CON
TROL
LER
OF
F
FULLPOWER
Also functions as a binding post.