Rain Bird WTA-1875 Owner's Manual - page 3
3
STEP 3: SETTING AND CHANGING PROGRAMS
Turn CLOCK RING to desired starting time. Turn DURATION RING to desired length
of watering time (duration). Turn CYCLE DIAL to desired cycle period for watering.
To change the program, reset the rings and dials.
CYCLE OPTIONS
MANUAL WATERING
Unit waters continuously when Duration Ring is in ON position. Unit will not water
when Duration Ring is OFF. Timer responds approximately two seconds after Duration
Ring is set to On or OFF position.
MANUAL/1ST DAY BUTTON sets timer for manual watering or the first day in a cycle
watering period.
To water one time only, turn DURATION RUNG to desired duration. Press MANUAL/
1ST DAY.
To set the first day for cycle watering, turn CYCLE DIAL to 1ST DAY RESET. Press
MANUAL/1ST DAY button once to set the first day of watering to today; twice for to-
morrow; three times for the day after tomorrow. Turn CYCLE DIAL to cycle period (8
hours up to 7 days).
LED blinks when pressed. Maximum 1st Day reset is three days.
1st day reset
Refer to "Manual Watering"
Chkclk
Refer to "Check Clock Function"
8 hrs.
Every 8 hours
12 hrs.
Every 12 hours
24 hrs.
Every day
2 Days
Every other day
3 Days
Every third day
7 Days
Once a week