Einbauanleitung für ipaul verstärker ipaul 4.300 4-kanal verstärker art.-nr. 271051 bitte vor beginn der arbeiten einbauanleitung sorgfältig lesen! Aiv gmbh + co. Kg – tatschenweg 1 – 74078 heilbronn telefon 07131 / 5953 0 - telefax 07131 / 5953 29.
2 sicherheitshinweise für den anwender bitte lesen sie alle warnungen in dieser anleitung. Diese informieren sie über mögliche persönliche schäden oder beschädigungen von sachwerten! Die produkte sind nur für anwender mit dem erforderlichen einbaufachwissen geeignet. Die einschlägigen sicherheitsbes...
3 inhaltsverzeichnis ipaul 4.300 sicherheitshinweise 4 technische spezifikationen 6 technische daten 6 frontansicht und bedienungselemente 7 „bedienungselemente“ 7 bild 1 installation 8 anschluß remote 9 einschalt- / funktionskontrolle durch led 9 anschluß „low input“ verstärkereingang 10 ausgang „l...
4 vor der inbetriebnahme ipaul 4.300 hinweis die installation und die einstellung des verstärkers sollte nur von qualifiziertem personal vorgenommen werden. Lesen sie die bedienungsanleitung sorgfältig und folgen sie den darin gegebenen hinweisen zum anschluss und zur einstellung des verstärkers. Wa...
5 verkabelung ipaul 4.300 warnung verwenden sie nur stromversorgungskabel mit ausreichendem querschnitt. Beachten sie hierbei die technischen daten im anhang. Ein höherer querschnitt ist immer zu empfehlen. Der querschnitt des erdungskabels muss mindestens so groß sein wie der des pluskabels. Verleg...
6 technische spezifikationen ipaul 4.300 • leistungsverstärker mit integriertem hochstrom-mosfet-schaltnetzteil. • endstufen in gegenphase für leistungsverdoppelung bei mono-brückenschaltung. • endstufen 2 Ω stabil, brücken und tri-mode fähig. • verstärkungsaufbereitung mit sehr geringem rauschantei...
7 frontansicht und bedienungselemente ipaul 4.300 bild 1: bedienungselemente.
8 1 = stromanschluß (–) minus, karosserie bzw. Zentraler massepunkt. 2 = remoteanschluss vom cd-radio. 3 = stromanschluß (+) plus, nur über sicherung vornehmen. 4 = flachsicherung 2 x 30a nach din-norm, von außen ersetzbar. Nur durch selben wert ersetzen! 5 = anschluß für externes temperaturanzeige-...
9 rotes kabel mit querschnitt von 4 mm2 bis 10 mm2 direkt an den pluspol (+) der batterie oder an den zentralen pluspunkt der hifi-anlage anschließen und zum verstärker verlegen. Unbedingt darauf achten, daß das hauptstromkabel mit einer sicherung (siehe unten) abgesichert wurde. Freies ende dieses ...
10 anschluß „low input“: verstärkereingang an den cinchbuchsen „low input“ front (8) und „low input“ rear (9) fr/rr (rechts) und fl/rl (links) wird das ausgangssignal des autoradios / cd-players mittels cinchleitungen in den 4-kanal- verstärker eingespeist. Bei monobetrieb der endstufen müssen die b...
11 bild 2: anschlußschema verstärker, autoradio, lautsprecher..
12 betriebsart: breitband front & rear ipaul 4.300 in dieser betriebsart werden alle frequenzen linear von 10 hz bis 35 khz ohne bevorzugung verarbeitet und verstärkt. Die frequenztrennung erfolgt ausschließlich in den passivweichen des jeweiligen lautsprechersystems. Daher ist diese betriebsart für...
13 betriebsart: hochpass front & rear ipaul 4.300 diese betriebsart wird grundsätzlich für den kickbass-betrieb eines frontsystems oder als subsonic-filter für die tieftonentlastung eines frontsystems verwendet. Die belastbarkeit der kickbass-lautsprecher kann hierdurch erheblich gesteigert werden. ...
14 bild 5: frequenzverlauf bei betriebsart hochpass rear: betriebsart: tiefpass rear diese betriebsart wird nur eingesetzt wenn der verstärker ausschließlich zum subwoofer-betrieb bestimmt wird. Die interne aktive frequenzweiche läßt nur noch frequenzen unterhalb der eingestellten frequenz bei 12 db...
15 tip: mitgelieferte fernbedienung für „gain“ und „phase“ in die buchse „remote“ (11) stecken und auf der fahrersitzposition „gain“ und „phase“ solange verändern bis die basswiedergabe optimal ist. Die fernbedienung hat nur eine wirkung auf die rear-kanäle. Tip: hochpass mit einer grenzfrequenz von...
16 betriebsart: bandpass rear ipaul 4.300 diese betriebsart wird nur eingesetzt wenn der verstärker zum betrieb von mitteltönern vorgesehen ist, als verstärker für zusätzliche kick-bässe im door-board oder kick-panel (siehe hierzu broschüre „kickbass forver“) oder im subwoofer-betrieb als tiefpass m...
17 bild 7: lautsprecher-anschluß „front stereo“ lautsprecheranschluß: mono-brückenschaltung der brückenanschluß erfolgt an den klemmen „front“ (6) +fl und fr– oder „rear“ (7) +rl und rr– mit der markierung „bridged“. Die bei dieser betriebsart jeweils nicht verwendeten klemmen l– und +r dürfen nicht...
18 bild 8: lautsprecher-anschluß „mono brückenschaltung“ bild 9: lautsprecher-anschluß front-stereo, rear-brückenschaltung (empfehlung).
19 lautsprecheranschluß: tri-mode (stereo-satelliten + subwoofer) ipaul 4.300 der verstärker ist ebenfalls für den lautsprecheranschluß in tri-mode an den ausgängen „front“ und „rear“ geeignet und kann für heckablagensysteme mit subwoofer eingesetzt werden. Bei anwendung dieses beschaltungsvorschlag...
20 hinweise zur stromversorgung ipaul 4.300 für den minusleiter (–) muß der gleiche kabelquerschnitt wie für den plusleiter (+) gewährt werden, um spannungsdifferenzen / potentialunterschiede sowie massestörschleifen zu vermeiden. Die karosserie ist wegen der großen potentialunterschiede als minuspo...
21 sollte der motorblock die störung nicht beheben, muß die karosserie bei laufendem motor mit dem minusleiter der anlage solange abgetastet werden, bis ein eindeutiges störminimum eintritt. Diesen punkt (punkt 2) freilegen und von unterbodenschutzresten befreien. Schraube mit großem durchmesser an ...
22 bild 11: prinzip schaltplan zentraler massepunkt.
23 garantiebedingungen ipaul 4.300 mit dieser verbrauchergarantie gewährleistet die aiv gmbh + co. Kg in heilbronn auf das produkt ab dem zeitpunkt des ersterwerbs bzw. Des ersteinbaus durch den autorisierten fachhandel eine zweijährige material- und verarbeitungsgarantie. Die garantie ist ausschlie...
Installation manual for ipaul amplifier ipaul 4.300 4-channel amplifier part-no. 271051 please read installation manual carefully before beginning installation! Aiv gmbh + co. Kg – tatschenweg 1 - 74078 heilbronn - germany telephone +49-7131 / 5953 0 - telefax +49-7131 / 5953 29.
2 user safety notice please read all warnings in this manual. They inform you of possible risk of personal injury and damage to property! These products are intended for use only by those possessing the necessary specialized training. The relevant safety regulations regarding auto parts, regulations...
3 table of contents ipaul 4.300 user safety notice 4 technical data 6 technical specifications 6 front view and controls 7 „controls“ 7 figure 1 installation 8 remote connection 9 switching on / control function with led 9 „low input“ connection: amplifier 10 output „line out“ for subsequent amplifi...
4 before beginning ipaul 4.300 notice the installation and adjustment of the amplifiers should be made only by qualified persons. Read the operating instructions carefully and follow all directions regarding connection and adjustment of the amplifier. Warning consider all appropriate references in t...
5 connecting cables ipaul 4.300 warning use only electrical cable with a sufficient diameter. For our technical purposes a larger diameter is always recommended. The diameter of the grounding cable must be at least as large as that of the positive cable. Lay the cables one by one and in succession. ...
6 technical data ipaul 4.300 • performance amplifier with integrated high-current mosfet-switch power supply. • inverted output stages for performance coupling during mono-bridged mode. • output stage 2 Ω stable, bridge and tri-mode capable. • amplifier design for minimal noise. • reversible safety ...
7 front view and controls ipaul 4.300 figure 1: controls.
8 1 = power connection (–) minus, body and/or central ground 2 = remote connection of cd-radio 3 = power connection (+) plus, only over fuse 4 = flat fuse 2 x 30a in accordance with din-standard, replaceable from outside replace only with like kind! 5 = connection for external thermostat module (opt...
9 attach red cable with diameter of 4 mm2 to 10 mm2 directly to the positive terminal (+) of the battery or the central positive point of the hifi unit and run to the amplifier. Make absolutely certain that the main electrical cable is secured with a safety cable (see below). Provide the free end of...
10 „low input“ connection: amplifier input the output signal of the car radio/cd player is fed by means of arcasocket"low input" front (8) and “low input” rear (9) fr/rr (right) and fl/rl (left). During mono operation of the output stage the „low input“ sockets (8 and 9) must always be fed with a ri...
11 figure 2: cable diagram: amplifier, radio, loudspeaker..
12 operation mode: broadband front & rear ipaul 4.300 in this mode of operation all linear frequencies from 10 hz to 35 khz are processed and amplified without preference. Frequency separation takes place exclusively in the passive crossovers of the respective loudspeaker systems. This mode of opera...
13 operation mode: highpass front & rear ipaul 4.300 this mode is used principally for kickbass operation of a front system or as subsonic filter for the bass load throw- off of a front system. The maximum load of the kickbass loudspeakers can be substantially increased in this mode. The high-pass, ...
14 figure 5: frequency response of high-pass rear operation mode: operation mode: lowpass rear this mode of operation is used exclusively when the amplifier is assigned to subwoofer mode. The internal active crossover allows only frequencies under the cut-off frequency of 12 db slopeper octave to pa...
15 tip: insert the included remote control for „gain“ and „phase“ in the „remote“ (11) socket and, from the driver’s seat, adjust „gain“ and „phase“ until the bass rendition is optimal. The remote affects only the rear channels. Tip: accompany pure subwoofer operation with high-pass with a cut off f...
16 operation mode: bandpass rear ipaul 4.300 this mode of operation is used only when the amplifier is intended for mid-range use, as an amplifier for additional kick-bass in the door or kick panel (see brochure „kickbass forever“), or in subwoofer mode as low-pass with subsonic. • set switch „x-ove...
17 figure 7: loudspeaker connection front stereo loudspeaker connection: mono-bridge the bridge connection is performed at the clamps “front” +fl (6) and fr– (6) or “rear” +rl (7) and rr– (7) with the marking "bridged". The clamps l– and r+ not used for this mode of operation must not be occupied! C...
18 figure 8: loudspeaker connection mono bridged figure 9: loudspeaker connection front stereo, rear bridged (recommended).
19 loudspeaker connection: tri-mode (stereo-satellite + subwoofer) ipaul 4.300 the amplifier is likewise suitable for loudspeaker connection in tri-mode at the “front” and “rear” outputs and can be used for rear deck systems with subwoofers. With the application of this wiring suggestion the connect...
20 power provision indications ipaul 4.300 in order to prevent variations in voltage and ground loops, the same cable diameter must be used for the negative conductor (-) as for the positive conductor (+). Because of the potential for variation, the auto body is not appropriate as the negative pole ...
21 if this does not repair the problem, the auto body must be scanned, while the engine is running, with the negative conductor of the system until a clear reduction in distortion occurs. Free this point (= point 2) and remove remaining underneath protection. Place screw with a large diameter on thi...
22 figure 11: principal central ground diagram.
23 warranty terms and conditions ipaul 4.300 with this consumer warranty aiv gmbh + co. Kg in heilbronn, germany, ensures on the product, starting from the time of the first use and/or the first installation by the authorized specialized trade, a two-year materials and labor warranty. The warranty i...