Rainbow Star RF-V16 User Manual

Summary of RF-V16

  • Page 1

    Rf-v16 gps/gsm/gprs tracker user guide – web based setup 1. Microphone 4. Telephone number 1 9. Sim card slot 11. Speaker 2. Power button 5. Gps led 10. Sim card cover 12. Lanyard loop hole 3. Min-usb port 6. Sos button 7. Gsm/gprs led 8. Telephone number 2 initial setup 1. Unpack the box and check ...

  • Page 2: Power On/off And Charging

    7. Connect the power supply cord to the plug connector. 8. Insert the plug connector into a standard 15amp plug circuit and let it charge overnight power on/off and charging 1. Hold down the power button for 3 seconds. 2. A magical tune is played at start-up. 3. A “progressive build-up” tune is play...

  • Page 3

    5. Enter the tracker id no. Of your unit (e.G 1234567890) and then enter the password which is set at 123456 on delivery. This can be changed later. 6. Once you have logged in successfully to www.Gps123.Org , the screen will show an information bubble providing you with details of the device name, d...

  • Page 4

    4. Fill in the other details if you want but these are not necessary. The overspeed limit can however be useful if you suspect that the driver of the vehicle transporting the tracker holder is a careless or reckless driver. 5. Save the information you have entered and go back to ‘settings’. Click on...

  • Page 5

    7. Specify the time in minutes as to how often you want the device to update it’s location data. For example, you might want to track your child on the way to school so set the interval at 1 minute. Once your child is at the required destination you can change the interval to say 20 minutes. Accordi...