Model no.: qpcf color quad processor operating instructions qpcf-v0.1 this is an intelligent device. Please connect the video cable on channel one and then power on. The device will detect system automatically for pal or ntsc. Caution.
Precautions safety the unit operates on dc12v, 500ma to reduce risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not attempt to service this unit yourself as opening or removing the cover, it may expose you to risk of electric shock. Refer servicing to qualified se...
Table of contents 1. Index to parts and controls…………………………………………………………………..……….…1 1.1 front view 1.2 rear view 2. Set up menus…………………………………………………………………………………………………...……2,3 2.1 main list 2.2 alarm duration 2.3 baud rate 2.4 dwell time 2.5 int audible alarm 2.6 ext audible alarm 2.7 set time 2.8 dwell...
1. Index to parts and controls 1.1 front view r 1. Menu (exit) - it allows access to the system setup menus and exit the current status. 2. ( ▲ ) - displays the ch1 camera in the full screen format. It is also used to select the function under operating menu. 3. ( ▼ ) - displays the ch2 camera in th...
2. Set up menus a convenient system of on-screen menus allows you to set up key features such as sequencer dwell time, camera titles, camera color and time & date. The following paragraphs take you through the menu system step-by-step, describing each menu’s purpose and options. After connecting all...
2.9 alarm polarity: three options high, low or off for polarity set up 1. Use ◄► to select polarity. 2. Press ▲▼ to select channel 4. Press menu to exit 2.10 camera title setup: to set up each camera’s title 1. Use ◄► to select the position 2. Press ▲▼ to select channel 3. Use “+”, “-“ to select the...
3.7 alarm connector pin assignments 3.7.1 25pin com port: 3.7.2 9pin com port: 3.8 remote control operation if you would like to connect this device to computer, please find following ascii codes for reference. A auto q quad m menu v vcr f freeze 1 ch1 2 ch2 3 ch3 4 ch4.
4. Additional informations 4.1 trouble shooting problem suggested action bad picture quality after power on please connect the video cable on channel one before power on. The device will detect system automatically for pal or ntsc. No video 1. Please check if the power supply is connected. 2. Please...
