RainSoft EC4 100 V Owner's Manual - page 13
13
Helpful Tip: The scale for block
salt is designated by levels 1 _ 4.
The scale for bag salt or potassium
chloride is designated by levels 1 _
5. For larger tanks, a salt scale
sticker is available through your
RainSoft Dealer,
part number
19024.
!
Important Note: When you exit the
Customer Settings, the computer
will
automatically
save
any
changes that have occurred.
Customer Settings
The Customer Settings mode allows access to a variety of program-
ming options:
Salt Level:
This function sets the level of salt in the salt tank.
Vacation Mode:
This function puts the system into hibernation while
you are on vacation or gone for extended period of time.
Salt Alarm:
This function sets the audio and visual alarms to be active
and the time they will sound or inactive with no sound.
Time of Day:
This function sets the current time of day.
Current Day:
This function sets the current day of the week.
Current Date:
This function sets the current date by month/day/year.
Auto Daylight Savings Time:
This function allows the computer to
automatically adjust for daylight savings time in applicable areas.
Time of Regeneration:
This function sets the time of day (only on the
hour) that the computer will regenerate the system, based on the
parameters set.
To access these programming options, please follow the directions
listed below.
If the display is not lit, press any key to begin. When the display is lit,
press the
Customer Settings key
. Use the
Menu Forward and Menu
Back keys
to scroll to the parameter you wish to set or change. To exit
the Customer Settings function at any time, press the
Enter key
.
The computer will display: Salt Level
• Fill the salt tank (to level 4) with solar salt, block salt, or potassium
chloride.
• Use the
Adjust Up
and
Adjust Down keys
to change the amount of
salt to the level indicated on the salt tank scale (located on the side of
the salt tank).
The computer will display: Vacation Mode – OFF
• Use the
Adjust Up
or
Adjust Down key
to select “
ON”
.
• If you selected “
ON”
, press the
Enter key
. The computer will display:
Days Away – 2 Days.
• Use the
Adjust Up
and
Adjust Down keys
to change the number of
days away.
!
Important Notes: After setting the
vacation mode, the computer will
provide a 16 hour delay for your
convenience.
If
water use is
detected after the 16 hour delay,
the vacation mode is deactivated.
One day prior to the scheduled
return, the system will regenerate
at the normal regeneration time.
This feature will ensure a fresh
conditioner bed upon your arrival.